intake trouble
Re: intake trouble
Originally posted by Red99se
i recently installed an intake on my 99 se. the check engine light came on so i did a self test. i gave me a code 01 04. 01 04 is intake air temp. sensor. how would i fix that?
i recently installed an intake on my 99 se. the check engine light came on so i did a self test. i gave me a code 01 04. 01 04 is intake air temp. sensor. how would i fix that?
you will need to zip tie it somewhere close to the filter. i have a midpipe on my intake so there is a place for it. otherwise just tie if off close to the filter. you will have to cut the tape that the sensor has on it so you can get some slack.
Originally posted by sloppymax
you will need to zip tie it somewhere close to the filter. i have a midpipe on my intake so there is a place for it. otherwise just tie if off close to the filter. you will have to cut the tape that the sensor has on it so you can get some slack.
you will need to zip tie it somewhere close to the filter. i have a midpipe on my intake so there is a place for it. otherwise just tie if off close to the filter. you will have to cut the tape that the sensor has on it so you can get some slack.
thanks sloppy,you were talking about the boost sensor right?. i tried it with both of them and it did'nt work. any other ideas? any help you can give me would be greatly appreciated
thanks sloppy,you were talking about the boost sensor right?. i tried it with both of them and it did'nt work. any other ideas? any help you can give me would be greatly appreciated
i would take a look at the sensor to see if it been cut or damaged in any way. after that i would take it autozone and have the code pulled for free. i know you already did that but just in case it might have more than one.
Originally posted by sloppymax
i would take a look at the sensor to see if it been cut or damaged in any way. after that i would take it autozone and have the code pulled for free. i know you already did that but just in case it might have more than one.
i would take a look at the sensor to see if it been cut or damaged in any way. after that i would take it autozone and have the code pulled for free. i know you already did that but just in case it might have more than one.
the sensor look ok, and auto zone won't do a check on it becuse it is forigen. thats what they said anyway
the sensor look ok, and auto zone won't do a check on it becuse it is forigen. thats what they said anyway
Originally posted by sloppymax
ive heard some guys say that auto zone would not scan theirs either but they did mine when i went so im not sure where to go on this now. you could pay some one to do a diagnostic but your looking at around 60-65 bucks. if the sensor is intact and its situated near the intake then im baffled as to what it could be. the only thing i could think is that there is more than 1 code.
ive heard some guys say that auto zone would not scan theirs either but they did mine when i went so im not sure where to go on this now. you could pay some one to do a diagnostic but your looking at around 60-65 bucks. if the sensor is intact and its situated near the intake then im baffled as to what it could be. the only thing i could think is that there is more than 1 code.
Thread
Thread Starter
Forum
Replies
Last Post
maxima297
4th Generation Maxima (1995-1999)
4
Sep 30, 2015 03:32 PM




