foodmanry

iTrader: (15)

Does anyone know where you can get a suitable aftermarket replacement for the bulbs that light up the gauge cluster? They look like smaller wedge bulbs, and I was hoping to find some hyperwhite kind of deal. Any info and help would be appreciated.

Thanks

djPlayboy

there 194 bulbs and i believe there are 6 of them.

00SEinMA

I have no real facts to back this up but remember reading somewhere that they were 194's, but I haven't taken it apart and looked yet. How easy is it to get to the bulbs?

foodmanry

iTrader: (15)

No 194's are TOO BIG. Maybe W2's? I don't know if those are smaller than the 194's. Anyone else know?

BTW...the gauge assembly is easy to remove. A total of 8 screws and disconnecting some wire harnesses.

00SEinMA

I didn't know it was that easy to get to it. I'll let you know this weekend when I open it up and look for myself. If you do find out, please post the bulb size.

P.S. check out this guy's guages and other blues. Very impressive:
http://web.tampabay.rr.com/chessmaster/

foodmanry

iTrader: (15)

Damn....Well I was just looking at my old gauges (I put in the SE gauges) and see the bulbs can easily be replaced. Hmmm....Maybe they might have something at Radioshack.

badabing

Yo listen up: here's a story
About a little guy that lives in a blue world
And all day and all night and everything he sees is
Just blue like him inside and outside
Blue his house with a blue little window
And a blue-lit Maxima and everything is blue for him
And himself and everybody around
'Cause he aint got nobody to listen: ...

I'm blue da ba dee....

00SEinMA

I bet radioshack has them, but if they don't then go to an autozone or something and ask there. Are they LED's / do they need to be soldered? Or do they plug in?

spta97

iTrader: (1)

I would love to make my car blue like this guys. If anyone has a write-up or is going to do this...PLEASE POST!

00SEinMA

I found that link on a fourm somewhere a few days ago or so. Most of the upgrades are done soldering new LED's that you can buy from radioshack. He said it was a 3 day project, but I'm worried about soldering myself. If I do change the bulbs, I will try to do a writeup.

Y2KSESteve

iTrader: (22)

So I take it 4th gens are different than 5th gens behind the gauges? Cuz the 4th gens are all 194 bulbs. I did it on a buddy of mines 99.

foodmanry

iTrader: (15)

The bulbs just plug in like 194, but the 194 bulbs are too big. Damn... I'll check with Radioshack and see if they have them. They are not LED.

00SEinMA

Oh well... when you find out, make sure to post. When I poke around this weekend I'm also going to try to replace my Ignition Ring Light... have you looked into that at all?

foodmanry

iTrader: (15)

Well the Radioshack by my house didn't have the bulbs. I'm going to try the one by my work, they have more of a selection. I am crossing my fingers on this one....if I can't find them there I might just order some W2 and see if they fit. Other than that...SOL

I don't know about the ignition light, I'd have to look into it.

00SEinMA

sounds good I'll look into it too and see what happens, every time I look in my car from the passanger side and unlock it, I want that damn little ring to be blue. Guess we each have our pet pieves.

spta97

iTrader: (1)

I was thinking the same thing the other day!

Blu

iTrader: (63)

I have PIAA w2 in my reverse lights..they are much larger that the 194 bulbs in my corners. Matt

NJMAX2KSE

iTrader: (5)

EDIT: Check this out !!!

Single LED Wedge Base Bulbs





on the left is a Printed Circuit bulb from my 2000 SE cluster

on the right is a 194 from a 96 gxe cluster



If you know where to get a bulb or LED like the one on the left please let me know.. I have been trying to change these bulbs for over a year and cant find one small enough..

maseo77

iTrader: (1)

i was told that my 2k gauge bulbs were 194's, im glad u figured out that they arent b4 i opened up my cluster.. i would like to know if u find these bulbs also, because i wouldnt know where to find them either

spta97

iTrader: (1)

Just to note, these LED wedge bulbs are just regular 194 bulbs (like the large one in your pics). They're cool, but they won't replace anything other than a wedge bulb.

Also, depending on the surrounding material the color can change. I have the blue LED wedge bulbs in the door and they look like a light blue (because of surrounding white) in my friends Accord they are more of a deep blue in his doors.

Hotnicks

Does anyone know the actual name/size of this bulb?
I would like to search around and see who makes and/or who carries these.

I actually took one out and went to a few places to get some info, but had absolutely no luck. Nobody could even tell me what type of bulb it is!!!

NJMAX2KSE

iTrader: (5)

It is a Printed Circuit Bulb they are quite hard to find as i stated earlier..

D Love

I went to my Nissan Service Dept. a while back and got their codes for the bulbs. In the "Instrument Meter & Gauge" section, there are two types of bulbs, one is 14V-1.4W it's code No. is 24860P....the other type is 14V-3W it's code No. is 24860PA. I also got some info for the control unit....looks like the AC unit. For that section, it also looks like there are two different bulbs. One seems to be a 27545MA, and the other 27545M.

I don't know if any of this helps...but there you have it in case it does.

spta97

iTrader: (1)

For what year Max is this?

foodmanry

iTrader: (15)

Well I tried swapping a bulb behind the gauges with the bulb in the ignition key ring that lights up. It was too small for the gauge bulb fitting....soo damn still nowhere on these.

D Love

Sorry, I didn't realize that you had asked responded... It is for a 2k2 Max.