Keyless entry / Key FOB programming
Thread Starter
Newbie - Just Registered
Joined: Apr 2003
Posts: 2
Keyless entry / Key FOB programming
I have a 2001 Max SE and I bought a factory remote off of Ebay but I need programming intructions, NEbody know how to program these darn things? or do I have to go to the dealer and have him rip me off like they always do.
Newbie - Just Registered
Joined: Jul 2003
Posts: 2
Originally posted by tomcat
This is for a 2002 ...not sure if it works with 2001 or not:
1. Close all doors
2. Insert key into ignition and remove 6 times within 10 seconds. Hazards should flash twice.. Withdraw key completely each time.
3. Insert key and turn to ACC position
4. Push any button on keyfob once. Hazards will flash twice.
5. Open Driver side door. Test out keyfob.
I believe you can have a maximum of 4 keyfobs.
Tomcat
This is for a 2002 ...not sure if it works with 2001 or not:
1. Close all doors
2. Insert key into ignition and remove 6 times within 10 seconds. Hazards should flash twice.. Withdraw key completely each time.
3. Insert key and turn to ACC position
4. Push any button on keyfob once. Hazards will flash twice.
5. Open Driver side door. Test out keyfob.
I believe you can have a maximum of 4 keyfobs.
Tomcat
Worked for me!!!
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
Jun 6, 2017 02:01 PM