5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Engine service soon light turned on, can't accelerate

Thread Tools
 
Search this Thread
 
Old Feb 27, 2001 | 12:21 PM
  #1  
XeLz
Guest
 
Posts: n/a
it just happened today, driving in the morning, w/ moderate rain fall. i went over a puddle, and i probably spun my wheels for a split second, and then i went over 2 bumps. I then heard a bump in the engine. The rpm now doesn't go over 2.2, and the max speed of my car is 40 mph. This is the second big problem of my max. last june i had my whole transmission replaced by the dealer, and my car had been running perfectly fine since then.

i heard about max's that shut down the engine if there was too much stress on it, (not sure where i heard this) but did anyone ever expericience this? is this just a ECU problem, or actual motor failure. i have now about 37k+ miles, so i'm probably out of warrenty. hope this don't cost that much $$$.

Old Feb 27, 2001 | 12:55 PM
  #2  
MrBurner's Avatar
Senior Member
 
Joined: Nov 2000
Posts: 1,335
i'm guessing you have a stillen or other cone intake...let me know...i had one and had the same problem...a lot of people on this board have had this problem...many of them just unplugged the battery to reset the ecu but i was stupid and kept the intake on and brought it into nissan (this is before i knew ANYTHING about cars)...they said the intake took in water or something and it messed up my mass air flow meter (checkout other recent posts on MAF)...they said my warranty was voided and it ended up costing me around $900 or so to have them get a new mass air flow meter and put everything back to stock
Old Feb 27, 2001 | 05:53 PM
  #3  
XeLz
Guest
 
Posts: n/a
ya i have a cone intake. thanks man, and i'll do the search for MAF.
Old Feb 27, 2001 | 06:10 PM
  #4  
WILLSE's Avatar
Senior Member
 
Joined: Jan 2001
Posts: 1,279
Originally posted by XeLz
it just happened today, driving in the morning, w/ moderate rain fall. i went over a puddle, and i probably spun my wheels for a split second, and then i went over 2 bumps. I then heard a bump in the engine. The rpm now doesn't go over 2.2, and the max speed of my car is 40 mph. This is the second big problem of my max. last june i had my whole transmission replaced by the dealer, and my car had been running perfectly fine since then.

i heard about max's that shut down the engine if there was too much stress on it, (not sure where i heard this) but did anyone ever expericience this? is this just a ECU problem, or actual motor failure. i have now about 37k+ miles, so i'm probably out of warrenty. hope this don't cost that much $$$.

i dont think that the intake is the problem i spun my tires and my speedo read 110mph after that my ECU did the same exact thing that yours did it is the antiabuse feature on the car if it works to hard to where someting bad is going to happen than it shuts everything down.......after i did that i turned my car off and back on and it worked like it used to but i scared the **** out of me...... hope that it is nothin serious
Old Feb 27, 2001 | 08:09 PM
  #5  
edadams's Avatar
Senior Member
 
Joined: Dec 2000
Posts: 335
My 4th gen would act the same way after spining tires on ice or snow. It would loose power and start in 2nd or 3rd gear.
Old Feb 28, 2001 | 11:46 AM
  #6  
XeLz
Guest
 
Posts: n/a
dam! the car doesn't start anymore. Actually, it does but it turns off after half a second. Battery and oil lights are also on now. does it mean i have to take it to the dealer now?
Old Feb 28, 2001 | 01:38 PM
  #7  
xtantmaxima's Avatar
Senior Member
 
Joined: Sep 2000
Posts: 1,223
mine came on because my gas cap was too loose supposedly, that light is always for something stupid.
Old Feb 28, 2001 | 02:12 PM
  #8  
blew226
Guest
 
Posts: n/a
I had the similar problem when the cone intake had slightly come off of the MAF meter. Double check to make sure that there is a snug and complete fit around the hose.
Old Feb 28, 2001 | 04:32 PM
  #9  
MrBurner's Avatar
Senior Member
 
Joined: Nov 2000
Posts: 1,335
xelz, take off the cone intake and put everything back to stock...then take it over to the dealer...they will fix it under warranty...(it should work, anyways after you put everything stock on...if it does...say f*ck you to your cone and toss it like i did...i'm going to go w/ place racing because nobody (to my knowledge) has had any problems w/ their intake so far)
Old Feb 28, 2001 | 08:58 PM
  #10  
XeLz
Guest
 
Posts: n/a
this is the problem i have, well 2 big problems. 1... my stock air box is about 400 miles away.. i'm away at school, and that i called the dealership, and i think my warrenty expired, 36k/3 years, and i have 37.5k miles.. oh well i'm just thinking of towing to nearest dealership and paying whatever they charge me w/
!!!
Old Feb 28, 2001 | 09:10 PM
  #11  
MrBurner's Avatar
Senior Member
 
Joined: Nov 2000
Posts: 1,335
i actually talked to a guy today about warranty issue stuff...basically, he has installed turbos that put the engine over 1000hp and has gotten the motor replaced under warranty when it blows...you have to be very firm with them when they tell you that the warranty is void (which they will)...tell them that according to the guidelines, they have to prove to you without a shawdow of a doubt that it was, in fact the intake that caused the problem...if they say it is your mass air flow meter (as they told me) tell them to test your mass air flow meter on another maxima and if it works, they are not correct (apparently it is very difficult to blow a MAF)...

remember, they have to prove WITHOUT A SHAWDOW OF A DOUBT that the warranty was voided because of the intake..be very firm with them and be sure to talk to the service manager etc...even call nissan usa if you need to (it will be well worth it to save the $900 i spent for the new MAF
Old Mar 1, 2001 | 02:54 PM
  #12  
tomz17's Avatar
Senior Member
 
Joined: Nov 2000
Posts: 915
You have 5 years (dont' remember the mileage, prolly around 60k) warrenty for drivetrain!!!!!!

Go GET 'EM!!!


-Tom

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kjlouis
4th Generation Maxima (1995-1999)
11
Nov 24, 2018 06:09 AM
bc992164
4th Generation Maxima (1995-1999)
9
Aug 26, 2015 12:19 PM
beboski
4th Generation Maxima (1995-1999)
2
Aug 16, 2015 05:23 PM
Flores94
6th Generation Maxima (2004-2008)
3
Aug 11, 2015 12:53 PM




All times are GMT -7. The time now is 08:12 AM.