Hotshot Headers Installed
#42
Originally Posted by blubyu2k2
too much torque killed it, replacing it with stock tranny.
#43
Originally Posted by KiLLeR2002se
ive been using my kit much longer then you have and my tranny is still gold. mostly a 125 shot, were u sqeezing through gears?
#45
Originally Posted by Tally Max
how could you tell that it was taking a sh*t? just curious cause i spray through the gears with my auto and was interested in the waring signs of a malfunctioning tranny. thanks
#50
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Sep 2002
Location: Central Jersey
Posts: 1,414
I noticed something weird today with my car. Not sure if it's related to the headers but that is the only recent change to my car.
I noticed today that while I'm cruising at highway speeds (approx 70 mph, 2500 rpms) and I let off the gas my rpms don't drop. They only very slowly drift downwards as my car slows. Anybody have any idea what could be causing this?
I noticed today that while I'm cruising at highway speeds (approx 70 mph, 2500 rpms) and I let off the gas my rpms don't drop. They only very slowly drift downwards as my car slows. Anybody have any idea what could be causing this?
#51
Originally Posted by 03BlkSETE
I noticed something weird today with my car. Not sure if it's related to the headers but that is the only recent change to my car.
I noticed today that while I'm cruising at highway speeds (approx 70 mph, 2500 rpms) and I let off the gas my rpms don't drop. They only very slowly drift downwards as my car slows. Anybody have any idea what could be causing this?
I noticed today that while I'm cruising at highway speeds (approx 70 mph, 2500 rpms) and I let off the gas my rpms don't drop. They only very slowly drift downwards as my car slows. Anybody have any idea what could be causing this?
-J
#54
I received the HotShot Headers from Southwest Autoworks on Monday. I plan on installing them this weekend. I am just waiting on the 2 1/2" B pipe with resonator from Warpspeed. While speaking with Dallas, he said I should look into placing the O2 sensors back in the original location as 03BLKSETE did instead of installing in the B pipe. Dallas said every catalytic converter rep he has spoken to insisted that the O2 sensor be installed in original locations or closer to the motor. Dallas was aware that the precats were coming out with the headers going in, but still suggested placing the O2 sensors in the new headers Y pipe. Anyone have any valid input? Do you think Dallas is speaking from little or no experience or knowledge?
#55
Originally Posted by ahaling
I received the HotShot Headers from Southwest Autoworks on Monday. I plan on installing them this weekend. I am just waiting on the 2 1/2" B pipe with resonator from Warpspeed. While speaking with Dallas, he said I should look into placing the O2 sensors back in the original location as 03BLKSETE did instead of installing in the B pipe. Dallas said every catalytic converter rep he has spoken to insisted that the O2 sensor be installed in original locations or closer to the motor. Dallas was aware that the precats were coming out with the headers going in, but still suggested placing the O2 sensors in the new headers Y pipe. Anyone have any valid input? Do you think Dallas is speaking from little or no experience or knowledge?
03BlkSETE - any cel yet?
#56
I would imagine if the original 02 sensors come after a cat, it would be prudent to put the new 02 sensors behind a cat...since the headers remove the pre-cats, it would make sense to now move them behind the big cat. But I have no idea.
It would be nice if they figured this stuff out before they started selling them to the public!!!
Any dyno's yet? I can't wait any longeR! Also, any word on the next batch yet?
It would be nice if they figured this stuff out before they started selling them to the public!!!
Any dyno's yet? I can't wait any longeR! Also, any word on the next batch yet?
#57
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Sep 2002
Location: Central Jersey
Posts: 1,414
Originally Posted by MAXINXS
I am curious about this now. Hotshot - the makers of the headers, tell us to put o2 sensors behind the cat. Several other people have said they think they should go in the same area as the stock location. I'm still leaning toward Hotshot's recommendations, since they made the part.
03BlkSETE - any cel yet?
03BlkSETE - any cel yet?
#58
I'm going to install the O2 sensors in the stock B pipe. This way I can run the headers with the stock exhaust to compare any gains. If 03BLKSETE continues to run his set up with the O2 sensors in the headers Y pipe and then there are those of us who have them installed in the B pipe, we can get a real world comparison. Hopefully we can determine for OURSELVES which is the best location. I have Dallas sending me two more bungs with the new B pipe I ordered. I can then put them in the new B pipe or in the headers Y pipe.
#59
i wanna put a straight pipe instead of the convertor. the local shop told me some bs having to do with a OB2 or watever...anyone know what they are talkin bout... by the way my 02 censor doesnt work either way any downside to gettin a str8 pipe?
#60
ummm, if your O2 sensors don't work, then you need to do something about it. you're losing all kinds of gas mileage and power.
the mechanic didn't give you any BS either.
the OBDII cars have O2 sensors at the engine and after the cat(s). 'm not sure how many you have on the ones with precats, but if you run a straight pipe, you WILL have CEL lights come on.
the mechanic didn't give you any BS either.
the OBDII cars have O2 sensors at the engine and after the cat(s). 'm not sure how many you have on the ones with precats, but if you run a straight pipe, you WILL have CEL lights come on.
Thread
Thread Starter
Forum
Replies
Last Post
MaxLife17
8th Generation Maxima (2016-)
43
06-27-2019 01:37 PM