Air flow meter error.Please help
#1
Air flow meter error.Please help
Once again my SES light came on, went to Autozone and the guy ran the diagnostic on my car again. I came up with (1) air flow meter: to much air and 3 other repeated codes saying the oxygen sensor off of cylinder bank one is repsonding to slow.
Now i know i my MAFS isn't toast because the car would run like crap and it hasn't every time the SES light has come on. what could be the problem?
And where is cylinder one located, to the front of the car or towards the firewall.
The guy at autozone asked me was my filter on the INjen dry, and because of it , it may be alowing to much air through if the air filter isn't lubed properly with the recharging solution. Could this be true?
Now i know i my MAFS isn't toast because the car would run like crap and it hasn't every time the SES light has come on. what could be the problem?
And where is cylinder one located, to the front of the car or towards the firewall.
The guy at autozone asked me was my filter on the INjen dry, and because of it , it may be alowing to much air through if the air filter isn't lubed properly with the recharging solution. Could this be true?
#3
Originally Posted by BlackBIRDVQ
No there is no such thing as too much air blowing through a 3.5L MAF with a stock intake. U need a new MAF and 02 sensors.
No, i have a Injen intake system...funny thing is that my car dives fine with the SES light on. So is my MAFS really the cause ?
Thread
Thread Starter
Forum
Replies
Last Post
TallTom
5th Generation Maxima (2000-2003)
50
07-08-2022 09:54 AM
tarun900
4th Generation Maxima (1995-1999)
19
12-20-2021 06:57 PM