Croaking sound when I turn steering wheel all the way left. Help. =(
#1
Croaking sound when I turn steering wheel all the way left. Help. =(
I'm hoping this has nothing to do with the suspension upgrade, but when I make a really tight left turn (when I turn the steering wheel all the way left) and let off the brake just a bit I hear like this...sort of burly-ish croaking noise come from the driver's side of the car behind the wheel. What the hell is it? It doesn't happen all the time, only twice so far. Also, only when I turn slowly.
What's the deal?
What's the deal?
#4
is it like a crunk-crunk-crunk kinda sound that progresses as you turn the wheel? i had a similar noise when i did my H&R's & illumina's. the problem was an improperly installed strut bearing.
http://www.motorvate.ca/mvp.php/703
http://www.motorvate.ca/mvp.php/703
#5
Guest
Posts: n/a
i think this was said to be coming from the power steering pump as it is too close to somethin in the steering (i am saying what others have said). Heck i've had it for over 40k so if it were a suspension issue you would figure it would have gotten worse by now..
So yes, it's normal
So yes, it's normal
![got me](https://maxima.org/forums/images/smilies/ne_nau.gif)
#6
Originally Posted by Arnold K.
I'm hoping this has nothing to do with the suspension upgrade, but when I make a really tight left turn (when I turn the steering wheel all the way left) and let off the brake just a bit I hear like this...sort of burly-ish croaking noise come from the driver's side of the car behind the wheel. What the hell is it? It doesn't happen all the time, only twice so far. Also, only when I turn slowly.
What's the deal?
What's the deal?
#8
When you put the strut mount back on the top did u make sure the put was facing out towards the fender...
i made this mistake and the out was off a little and i had a creaking nise and i ended up having to replace the strut bearing....
but just check if the out is facing out
that should fix the problem
-J
i made this mistake and the out was off a little and i had a creaking nise and i ended up having to replace the strut bearing....
but just check if the out is facing out
that should fix the problem
-J
Thread
Thread Starter
Forum
Replies
Last Post
trasmadean
6th Generation Maxima (2004-2008)
13
02-01-2017 08:20 PM
Maxima_Joe
4th Generation Classifieds (1995-1999)
16
11-25-2015 08:19 AM