5.5 GEN Owners who have cleared out HIDS STEP IN...
#1
Guest
Posts: n/a
5.5 GEN Owners who have cleared out HIDS STEP IN...
Hey guys i know 02-03 HID is a touchy subject here on the org, Espically Irish LOL. Anyways iam clearing out my headlights tommrow and iam wondering what you guys used to cut the Lens and which tool worked the best. thanks
#2
Sanding wheel on a dremel. Write up from scmaxima2k... http://www.cardomain.com/member_page...=209763&page=3
#4
Originally Posted by crispykid717
Sanding wheel on a dremel. Write up from scmaxima2k... http://www.cardomain.com/member_page...=209763&page=3
Just make sure to buy another lens or two as a backup. The dremel is a little tricky sometimes.
#6
anyone wanna pm me on how to get the headlight out.... i know, touchy subject and everything... just thought i would ask.... i gotta fix the damage i did on just takin out 2 screws on the top and pullin like crazy... i bent something... mayb my data dot bracket or something
#7
Guest
Posts: n/a
Well im not telling u exactly but u gotta pull it by some side first, anyways back to the thread i did not put a lens in it i jus ordered a silver bulb and left it without looks very nice and clean and the blinkers are bright ill post pics when im finished with the bulbs i know someone else did it also on the org.
#9
Bought a 20 dollar Dremel tool kit at Target, 2 malibu lights at Home Depot for $3.50. After removing the amber lens out of the turn signal I traced it down with some permanent marker ontop of the Malibu lens light. I cut out the almost perfect round clear lens out of the Malibu light and placed it inside my HID housings. Then it was back to the oven. Funny thing is, I had my HIDs for like 3 months or more now, and I still have not installed them :P But sometime this coming week I have to- I have way too much condensation in my passenger OEM AE headlight.
#14
If you're pulling w/o taking out some screws, I wouldn't be doing that. PM the org member here who knows how to (Goldmaxnyc, I think). I don't know if you want to do it the way I know how it -- it's a huge pain in the a$$, and very time consuming.
I used a Dremel for the lens as well, using the method blackbird described.
I used a Dremel for the lens as well, using the method blackbird described.
Thread
Thread Starter
Forum
Replies
Last Post
Finkle
4th Generation Maxima (1995-1999)
13
09-27-2015 09:53 PM
Cant_Get_Ryte
5th Generation Classifieds (2000-2003)
3
08-28-2015 06:41 AM
MikesChevelle
5th Generation Maxima (2000-2003)
4
08-19-2015 07:19 AM