nysemt1

Anybody have any problem with there window motor on there 2k3??

importuner

maxima's in general are not common to having window motor issues. what is your specific problem?

nysemt1

won't roll up!!!

Bensmax00

won't roll up!!![/QUOTE]

you probly got a bad switch--I know how to test it--but its hard to explain because I work on Nissans all day-so I got tools that yo probly wont have--but I'll try---you can take a DMM and set it to to voltage--but you have to remove the door panel to do this. disconnect the motor harness connector--will be a black 2 wire connector located near the window motor--once diconnected--take the harness side(not to the motor to the harness)--and check for voltage when you move the switch up or down(now it doesnt matter which way you have the leads--one way is up and another is down) see that seems like a lot of work for you but this only takes me like 5 mins, cuz I have a load test tool(light bulbs).
---oh yea if you read voltage one way but not the other, then you need a switch--if both ways a moter---

importuner

it can either be your motor, regulator (stuck, jammed) or switch as described before. if it is the motor per-say you can try banging on the motor while holding the switch down. this usually activates the motor temporarily IF that's the problem. good luck...

merovi

iTrader: (7)

i did the led mod and on the main control switch i guess i fried a certain connection(which i believe i did...i saw smoke once) and now my passenger window wont roll up. i bought a new motor and it wasn't till then i figured out the motor is fine. my window will roll but not down.