jasba

Just noticed yesterday that my windshield washer does not work. I added fluid, still nothing squirting out. I checked the fuses under the dash, and the one next to the battery box marked " window deicer", all fuses good. Any idea where to start my trouble shooting, a quick peek before work and I do not even know where the washer pump is.......

njmodi

iTrader: (4)

Pump should be on the left side of the engine bay near the firewall - i.e. passenger side firewall.

Zog

iTrader: (1)

Did you install a FSTB recently? Sometimes the line gets crimped by the bar. Also you could check the line and make sure there's not a blockage or crimp in the line.

jasba

Looks like I may have blockage in the line or spray nozzles. I kept playing with it while driving to work today, and finally one of the nozzles on the passenger side started spraying fluid. The other 3 are not working yet, but by the pressure I am getting from the one nozzle, I'm guessing that the pump is good. I will pull the lines an soak the nozzles in some CLR or something to clean them out. Thanks for the advise, hopefully that will cure it.

Bluesbrekr

iTrader: (4)

You can also use a pin to open th nozzles. Have you waxed the car recently? It just takes a little wax to block the holes.

2k1Maxdrvr

Yeah what he said!

R12v56k 5th Gen SE

Doesn anyone know eactly were the pump is

Montego Murph

iTrader: (1)

It should be at the bottom of the washer reservoir.

Not sure of how the configuration is on the Max, but an old GM car I worked on years ago had a little screen at the bottom of the tank to serve as a crud filter. Turns out the screen had gotten pretty clogged over the years and wasn't allowing enough fluid through.

+1 on the pin idea.

T_Behr904