Is Warpspeed the only company that makes subframe connectors?
#1
Is Warpspeed the only company that makes subframe connectors?
I ordered the stage 1 subframe connectors from them about 4 months ago and still haven't received them. Every time I call (once or twice a month) a nice lady answers the phone (I can't remember her name) and tells me Dallas should have them finished by next week. If Warpspeed is the only company that makes these, then I'll patiently wait. If not, then I'm definitely getting them from somewhere else.
Tony
Tony
#3
Funny you should start this thread....I just posted the same question - didn't notice yours!
I'm sure Matt Blehm has the "ability" to do it, but as I recall he has some "deal" with Dallas that he won't make them (non-compete agreement I guess...)
I'm sure Matt Blehm has the "ability" to do it, but as I recall he has some "deal" with Dallas that he won't make them (non-compete agreement I guess...)
#5
#8
Originally Posted by Kevlo911
They are the only ones, have you been charged?
Tony
#9
No matter how many times I request a sticky warning people not to buy through warpapeed it will never happen and so blame maxima.org for letting the members consistantly get screwed by this guy dallas. Dallas will continue to screw members over because he is a scumbag.
#11
Originally Posted by BlackBIRDVQ
I will call up and say I wanna pick em up in person, I don't mind driving to Arkansas over the weekend. I am wondering what they will say.
#12
Originally Posted by BlackBIRDVQ
I will call up and say I wanna pick em up in person, I don't mind driving to Arkansas over the weekend. I am wondering what they will say.
98SEBlackMaxima got them installed at Warpspeed on the way to Maxus.
#13
I will call em up and see if they are going to sell em to me if I show up there to pick up a few sets. I dunno if they are willing to sell me that many sets, but I'm sure I could stuff 3-4 sets in the trunk of our Legend.
#14
Originally Posted by BlackBIRDVQ
I will call em up and see if they are going to sell em to me if I show up there to pick up a few sets. I dunno if they are willing to sell me that many sets, but I'm sure I could stuff 3-4 sets in the trunk of our Legend.
#15
Originally Posted by Kevlo911
98SEBlackMaxima got them installed at Warpspeed on the way to Maxus.
This is a 5th gen forum and I don't think that having sfc's installed on a 4th gen is going to help us. Our problem deals with them not fitting correctly, something that you 4th genner's don't have to worry about.
Dallas won't return my call because he never got around to correcting the stage 2 problem and he doesn't want to refund me my money. What's worse is that I spent good money on getting these things powercoated.
#18
I need to talk to my sources 1st in order to see if making these is a viable option.
If they do decide to go ahead and make something, the design will be similar to the Warpspeed one, I'm going to make it in 2 stages. 1st stage will be weld in like the WSFC, and 2nd one will just bolt on to the plates provided. WSFC Stage 3 will be incorporated to stage 2 of our connectors. I'm going to go a few steps further, possibly offer a tie bars for the interior- similar to the Sparco design for EVOs etc. It goes between the B pillars and offers mounting points for a racing harnes.
I know this might interest you Josh Since I know you NEED a harness when autoXing.
http://www.sparcousa.com/harness_bars.asp
If they do decide to go ahead and make something, the design will be similar to the Warpspeed one, I'm going to make it in 2 stages. 1st stage will be weld in like the WSFC, and 2nd one will just bolt on to the plates provided. WSFC Stage 3 will be incorporated to stage 2 of our connectors. I'm going to go a few steps further, possibly offer a tie bars for the interior- similar to the Sparco design for EVOs etc. It goes between the B pillars and offers mounting points for a racing harnes.
I know this might interest you Josh Since I know you NEED a harness when autoXing.
http://www.sparcousa.com/harness_bars.asp
#19
Originally Posted by BlackBIRDVQ
I need to talk to my sources 1st in order to see if making these is a viable option.
If they do decide to go ahead and make something, the design will be similar to the Warpspeed one, I'm going to make it in 2 stages. 1st stage will be weld in like the WSFC, and 2nd one will just bolt on to the plates provided. WSFC Stage 3 will be incorporated to stage 2 of our connectors. I'm going to go a few steps further, possibly offer a tie bars for the interior- similar to the Sparco design for EVOs etc. It goes between the B pillars and offers mounting points for a racing harnes.
I know this might interest you Josh Since I know you NEED a harness when autoXing.
http://www.sparcousa.com/harness_bars.asp
If they do decide to go ahead and make something, the design will be similar to the Warpspeed one, I'm going to make it in 2 stages. 1st stage will be weld in like the WSFC, and 2nd one will just bolt on to the plates provided. WSFC Stage 3 will be incorporated to stage 2 of our connectors. I'm going to go a few steps further, possibly offer a tie bars for the interior- similar to the Sparco design for EVOs etc. It goes between the B pillars and offers mounting points for a racing harnes.
I know this might interest you Josh Since I know you NEED a harness when autoXing.
http://www.sparcousa.com/harness_bars.asp
#20
Originally Posted by Edward Lee
This is a 5th gen forum and I don't think that having sfc's installed on a 4th gen is going to help us. Our problem deals with them not fitting correctly, something that you 4th genner's don't have to worry about.
Blackbird was wondering if he could pick them up. So I told him that they installed them on my friends car. So that tells him that he CAN pick them up and they would install....
#21
I mount my harness to the rear seat belt buckle mounting points, and remove the rear seat all togheter when I autoX. I am awaiting some new seats for my Maxima- Corbeau, and I would like a tie bar similar to that Sparco one for my Sparco Clubman harness. I'm also conteplating on taking the Max out of daily driving duty and gutting it all out and making it a total race car.
#22
Originally Posted by BlackBIRDVQ
I mount my harness to the rear seat belt buckle mounting points, and remove the rear seat all togheter when I autoX. I am awaiting some new seats for my Maxima- Corbeau, and I would like a tie bar similar to that Sparco one for my Sparco Clubman harness. I'm also conteplating on taking the Max out of daily driving duty and gutting it all out and making it a total race car.
#23
I have experienced similar customer service issues with WSPD and Dallas. I currently have the stage 1 on my 2002 and I must say it is a tremendous improvement over just fstb, rsb, maxspeeds w/illuminas. I have been waiting for about 3 months now for the stage 2 and everytime I call. He keeps saying they are going out fedex today or tommorrow and this has been happening about every week for that long. I have gotten numerous excuses as to fedex lost the shipments etc.
I don't think he is necessarily a "scumbag" but just they don't have the manpower or space to replicate these. I don't think these are as easy to build, as the y-pipes they are known for, and which I have owned many of. My local shop "Grand Muffler" had to really manhandle these to fit correctly as they tabs and everything were a little off. Regardless of how simple these sound to build, I think it will pose a challenge for anyone else attempting to do so especially considering the low cost. However I am with you guys, I would definitely be willing to pay a little more for a guaranteed delivered product!
I had the stage 1,2 on my 98 I30t and really liked the rigidity and benefits in ride quality they offered so I am going to continue calling until my stage 2 arrives for my 2002.
I don't think he is necessarily a "scumbag" but just they don't have the manpower or space to replicate these. I don't think these are as easy to build, as the y-pipes they are known for, and which I have owned many of. My local shop "Grand Muffler" had to really manhandle these to fit correctly as they tabs and everything were a little off. Regardless of how simple these sound to build, I think it will pose a challenge for anyone else attempting to do so especially considering the low cost. However I am with you guys, I would definitely be willing to pay a little more for a guaranteed delivered product!
I had the stage 1,2 on my 98 I30t and really liked the rigidity and benefits in ride quality they offered so I am going to continue calling until my stage 2 arrives for my 2002.
#24
Originally Posted by BlackBIRDVQ
I will call up and say I wanna pick em up in person, I don't mind driving to Arkansas over the weekend. I am wondering what they will say.
Tony
Thread
Thread Starter
Forum
Replies
Last Post
hez8813
5th Generation Maxima (2000-2003)
11
03-12-2020 12:06 AM
BrandonCause
4th Generation Maxima (1995-1999)
4
09-14-2015 10:41 PM