5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Occasional suspension "clunk" after installing maxspeeds

Thread Tools
 
Search this Thread
 
Old 11-12-2005, 02:23 PM
  #1  
Senior Member
Thread Starter
iTrader: (3)
 
kobalt's Avatar
 
Join Date: Jun 2004
Posts: 655
Occasional suspension "clunk" after installing maxspeeds

Just like the title says: I installed maxspeed springs in the front and now I get an occasional "loose" clunk sound when going over road imperfections. The clunk happens only on the driver's side - I checked all the bolts removed during spring installation and nothing is loose. Could it be bad swaylinks?
kobalt is offline  
Old 11-13-2005, 11:15 AM
  #2  
Senior Member
 
theMax's Avatar
 
Join Date: Nov 2000
Posts: 1,985
Originally Posted by kobalt
Just like the title says: I installed maxspeed springs in the front and now I get an occasional "loose" clunk sound when going over road imperfections. The clunk happens only on the driver's side - I checked all the bolts removed during spring installation and nothing is loose. Could it be bad swaylinks?
I had this problem from my rears and it went away in a few weeks when the springs settled in. I would give it some time if you are VERY SURE you did the install correctly. Some folks have said that they put some of the front components in backwards.

Did you install the plastic/rubber spring isolators on the maxspeeds from the stock springs on the top few coils?
theMax is offline  
Old 11-13-2005, 08:43 PM
  #3  
Senior Member
Thread Starter
iTrader: (3)
 
kobalt's Avatar
 
Join Date: Jun 2004
Posts: 655
The problem went away ! I jacked the front up to find the cause for the knocking. I found none, but afterwards the car did not make the noise anymore! I think lifting the car gave the spirngs an opportunity to re-settle.
kobalt is offline  
Old 11-14-2005, 06:45 AM
  #4  
Senior Member
iTrader: (9)
 
MaximaPolak's Avatar
 
Join Date: Feb 2003
Location: Passaic County, NJ
Posts: 4,426
It was probably not centered and when you picked it up, it moved.
MaximaPolak is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MaxLife17
8th Generation Maxima (2016-)
43
06-27-2019 01:37 PM
Violator
4th Generation Classifieds (1995-1999)
1
09-09-2015 10:14 AM
dcardello
4th Generation Maxima (1995-1999)
7
09-03-2015 11:44 PM
A32goldylocks
4th Generation Maxima (1995-1999)
2
09-02-2015 06:39 AM



Quick Reply: Occasional suspension "clunk" after installing maxspeeds



All times are GMT -7. The time now is 10:58 AM.