BODKAx3BEPb

Anybody ever install HIDs in their reverse lights? Just wondering if it's possible, if its been done before and how it looks.

NYPD-Arnold

iTrader: (8)

Umnitza.com sells them. It's very possible.

CoolMax

iTrader: (7)

umnitza does...or at least used to.

http://forums.maxima.org/showthread....ht=reverse+HID

http://forums.maxima.org/showthread....ht=reverse+HID

irish44j

iTrader: (38)

it looks....like a bright reverse light! (shocker!)

there's a reason nobody (that I've ever heard of) has actually bought these - because they are completely pointless! I mean, it's not like you're driving around backwards all over the place

NYPD-Arnold

iTrader: (8)

Seriously. It really was a terrible idea in the first place. Debasing an H3 bulb is a MUCH MUCH better alternative with nearly identical results. Plus you'll save yourself $195. =O

claudiusmaximas

i honestly think that is one of the most unneeded mods...unless you need to replace the bulb, those things are on like 5 seconds if ever in a day..headlights are more practical for HId but reverse lights? i agree with NYPD-Arnold

krazysashka

Hey Arnold how do you do that, is there a write up? Pics?

rteenie22

if you drive at night they arent that pointless trust me. i have a newspaper route and do a lot of turning around i could use a pair

NYPD-Arnold

iTrader: (8)

Just get rid of the metal base of the H3 bulb and slap it into the socket of the reverse bulb. Look at the socket, look at the original bulb, and look at the H3 bulb -- you should figure it out. I never did, but my boy PoLo did.

MacAlert

iTrader: (1)

I'm going to Marcos sometime soon to do this as well. So hard to see out the back with 20% tints and no street lights. Hope this helps.

PoLo

iTrader: (7)

before:

http://polo.lxanyc.com/2002MaximaSE/...p/IMGP0317.JPG

LEFT H3, RIGHT OEM (in the 2nd picture, note how the strength of the H3 allows light to shine off the floor, where as the OEM bulb, NOPE.
http://polo.lxanyc.com/2002MaximaSE/...p/IMGP0322.JPG
http://polo.lxanyc.com/2002MaximaSE/...p/IMGP0323.JPG

both bulbs replaced
http://polo.lxanyc.com/2002MaximaSE/...p/IMGP0327.JPG

MacAlert

iTrader: (1)

Just got back from Marcos. Damn are the H3's bright!!! This is a definate mod for people who live where it's dark out.

burnurass

iTrader: (21)

got pics of the finished result?? (the bulb itself). I too have 20% tint and cna't seeeee ANYTHING in my driveway.

Thanks!

MacAlert

iTrader: (1)

Ehh, sorry. No pics, to much rain. All you do is remove all the metal from the bulb. Then, bend the two contacts so that they sit flush against the glass (in opposite directions). Then, you have to cut a piece off the wire in the harness (where the bulb will sit). Thats all....took us about 30min for the first bulb, maybe 5 min for the second.

Teufelhunden

iTrader: (8)

doesnt it get dark everywhere? ive never been to a place where it never gets dark....
i know what your trying to say but i just had to point that out.
arent you suppose to not touch the bulb? if you do it will blow out?

MacAlert

iTrader: (1)

Well, when I say dark at night....I mean no street lights. In NYC I don't have to worry. Go out to NJ or Philly....I can't see anything behind me.

About touching the bulbs, I used my stockers so I don't care if they die faster. The next set I will use a paper towel or gloves.