2k1 Fog bulb replacement
03-05-2006, 08:45 AM
#1
Member
Thread Starter
Join Date: Apr 2003
Posts: 54
2k1 Fog bulb replacement
Hello ppl, I am trying to replace the fogs in my 2k1 and need some assistance. I looked for the writeups in the howto's but they are dead links. I can get to the back of the fog housing easy enough, but there are two clips in the top of the fog housing that I have no idea how to remove. They look like three pronged white plastic clip with a metal rod in the center. Any help is appreciated. Thanks.
03-05-2006, 08:48 AM
#2
after you removed the 10mm bolt on the bottom of the fog light housing, you have to push the metal rods from behind towards the front of the car. i think i used a philips screwdriver with a cloth wrapped around it. that will push the assembly out the front. make sure wiring clips/harness are undone before you do that.
03-05-2006, 09:03 AM
#4
Supporting Maxima.org Member
iTrader: (15)
Join Date: Nov 2004
Location: Clifton Park, NY
Posts: 4,035
Originally Posted by j2k15spd
Thanks, How do you get the wiring harness off? I don't see any release buttons on it.
It can be a PIA to get off, but there is a button on the harness to push in that will let it go.
03-05-2006, 09:04 AM
#5
Thread
Thread Starter
Forum
Replies
Last Post
YourLocalAsian
6th Generation Maxima (2004-2008)
3
08-17-2015 02:33 PM
Viralkill
7th Generation Maxima (2009-2015)
1
08-17-2015 10:54 AM
MikesChevelle
5th Generation Maxima (2000-2003)
4
08-06-2015 11:36 AM