Planning to make my own JWT POP intake
#1
Planning to make my own Berk mid-pipe
Ok well like in the title im making my own berk mid-pipe. Well i already have everything exept the section that goes between the TB and where the MAF would be (the peice that replaces the black box that has 3 hoses attached to it). Does any one have good pictures of that section and can some one tell me sizes of the hoses that attach to it?
Thx
Thx
#2
I'll take pics of mine when I get home, but I have a 2003, and we have slightly different intakes.
I don't mean to be an ***, but if you own a Maxima, you have a complete stock intake at your disposal. Can't you just look at yours, and wouldn't that be better than a picture?
I don't mean to be an ***, but if you own a Maxima, you have a complete stock intake at your disposal. Can't you just look at yours, and wouldn't that be better than a picture?
#4
Originally Posted by chopstix2nrz
Ok well like in the title im making my own jwt pop intake. Well i already have everything exept the section that goes between the TB and where the MAF would be
#6
Originally Posted by NmexMAX
Then this isn't a JWT because there is no section that goes between the TB and MAF with a JWT/Stillen.
#7
thats sort of how mine is already but mine goes right up to behind the battery so its further away from the engine and so that sensor wire would reach, and im trying to get a pipe to get rid of that black box thing thats behind the maf, so the air flows straight to the tb but mostly so it looks cleaner under the hood
#11
Check the berk/fc website.. there are many pictures of it there or cardomain, or members rides area or the great picture thread.... Lots of pictures of these intakes in there... Come to think of it .. mines in 2 of the aforementioned 'places' too..
Thread
Thread Starter
Forum
Replies
Last Post
The Frye
7th Generation Maxima (2009-2015)
6
09-02-2021 11:03 AM