Maxima570

iTrader: (1)

Hey before i did this I was searching for a write up on how to remove the old mirror and install the new one. I couldn't find anything, so I just tried it and it was very easy. There is a screw on the buttom of the mirror where it connects to the windsheild, you will need an allen wrench to get it off. Once it is loosened enough, just slide the mirror toward the back of the car, and it comes right off, and you can put the new one on. It takes like 25 seconds. I did this on an 02, not sure about other years though.

Does anybody know if the easy pass box effects the compass, or should if I should move it? It's touching the new mirror where it connects to the glass, thanks.

HotshotVQ35

iTrader: (5)

where did you get the 03 mirror?

djbonsu

i did the same thing for my 02! very simple and easy!

HotshotVQ35: i got my mirror from the junk yard. any infiniti 130/135 mirror will work or max 02-03. my mirror was actually from an 04 I35. paid $65 bucks shipped. nice addition to the max.

707SE

iTrader: (2)

I did the same thing to my 02SE. It's a great mod that I'd do again if I had too. I found mine on ebay. I did a buy it now for $40 + $10 shipping.
Easy mod, took less than 10 minutes and works great.

ps here is a good writeup

http://www.cardomain.com/ride/351821/14

MIXXMAX

iTrader: (1)

I went with something different than stock Nissan mirrors and went with this one. Here is mine:

slickrick

iTrader: (12)

How can you get this mirror off? I put it on, but I'm afraid I'll break the windshield if I yank it off.

2k2 Max SE

what mirror is that?

danger300z

iTrader: (4)

yeah who makes that and how much?

707SE

iTrader: (2)

I believe once you remove the screw you simply slide UP and it should slide off.

MixxMaxx, where did you pick up that mirror? Its nice

slickrick

iTrader: (12)

I did not use a screw to put the mirror in...am I missing something?

707SE

iTrader: (2)

It's a screw but it doesn't screw into anything. It screws agains the little plate or whatever it is that is glued to the windshield. Like i said, it screws against this so that the mirror sits tight against it and doesn't slide.
If there are no screws then the mirror should just slide up off of the little plate glued to the wind shield. Look at that writeup I posted on the cardomain site above. It'll probably explain it a bit better than I can.

MIXXMAX

iTrader: (1)

I got the mirror off Ebay, but they run well over $125 or so if your'e willing to shell out this much money for just a rear view mirror. I like it and it fits well with my blue LED theme in my car. Thanks for the compliments.

slickrick

iTrader: (12)

wait I might have screwed that screw in and forgot...I did this months ago. Thanks.

Puppetmaster

iTrader: (48)

Also, deoncollins used to sell em on the .Org. I got mine for 55 shipped from him.

Puppetmaster

iTrader: (48)

Not really. It should just click/snap right in. Took me a while to figure that one out because I kept looking for where to put the screw back in.

Puppetmaster

iTrader: (48)

No. The EZ Pass will not affect the compass.

slickrick

iTrader: (12)

OK thanks. Yeah I had the same trouble. So if it clicks and snaps in, how DO i remove this bad boy?

Maxima570

iTrader: (1)

I got mine from Deoncollins, he was a good guy.

Mixxmax: I like the temp in the mirror its easier to read/looks better

Puppetmaster

iTrader: (48)

Its the same way the original mirror came out. There's a clip on the inside that you get to with a flathead screwdriver to release the mirror. The FSM has a diagram of the mirror removal somewhere, that's what I used as a guide.

Trurida18

iTrader: (4)

so where can someone buy the stock mirror for the 2003...the one with the temp on the mirror?

Trurida18

iTrader: (4)

also is "deon" still selling those mirrors?