Boss Chen's are in!!! **Pics**
Boss Chen's are in!!! **Pics**
First and most important, many thanks go out to Patrick (phenryiv1) for the help and the use of his garage and tools. Many thanks also go out to Jason (Cutler) for his help and knowledge of these cars. Thanks a lot guys! 
First driving impression on the BCs.......AWESOME! The road feel is superb and the ride is not harsh at all. Before I was on Eibach/Illumina with settings at 3f/4r. Everytime I would hit a bump in the road in those, it would be a very harsh jolt and you would hear and feel it. With the BCs, it is much more manageable with very little jolt. NIIIIIICE. This is just my very initial impression driving home from Patricks house (about an hour away). I will get some more feedback after some more miles.
So here are some pics after I got home. Bear in mind I am still fidgeting with the ride height so it's pretty low. Once I get the ride height where I want it, I will take some more pics. BUT, here we go as it sits right now.

Passenger rear:

Passenger front:
First driving impression on the BCs.......AWESOME! The road feel is superb and the ride is not harsh at all. Before I was on Eibach/Illumina with settings at 3f/4r. Everytime I would hit a bump in the road in those, it would be a very harsh jolt and you would hear and feel it. With the BCs, it is much more manageable with very little jolt. NIIIIIICE. This is just my very initial impression driving home from Patricks house (about an hour away). I will get some more feedback after some more miles.
So here are some pics after I got home. Bear in mind I am still fidgeting with the ride height so it's pretty low. Once I get the ride height where I want it, I will take some more pics. BUT, here we go as it sits right now.

Passenger rear:

Passenger front:
Originally Posted by n3985
Nice, how much were they? I PMed Larrio and got no reply 

It'll run you around $900, maybe less. Depending on shipping and payment method.

Originally Posted by Tank987
so you think those wheels would look good on 2000 black SE?
Originally Posted by Squirrel82
How far away are you from 20707? Im asking cause I might be interested in getting these coilovers and if you didnt mind Id drive to you to see how the ride is.
sweet man, im glad they worked out. i have been wondering how they ride. i had sprint springs for awhile, and like you said with the eibachs, every little bump was amplified with a harsh jolt and hearing/feeling it.
i love the boss chens. I recently set my coilovers on the full setting... wow they were stiff but they handled so well through any turn I took... and the next day i set dampening back down and the ride was just superb! what a perfect ride.
Thanks everyone! The more I drive around on these, the more happy I am with the purchase.
I messed with the ride height more today, but I just couldn't get it perfect. Everytime I'd lower one wheel, the other side would be higher. Then I'd lower that and another wheel would be lower. And this merry-go-round went on for a while until I got it alllllmost where I want it. I'm gonna drive around at this setting for a week and take some measurements next weekend to see how everything has settled. Then I'll go from there.
Thanks again Larry, you have yourself one nice coilover!
I messed with the ride height more today, but I just couldn't get it perfect. Everytime I'd lower one wheel, the other side would be higher. Then I'd lower that and another wheel would be lower. And this merry-go-round went on for a while until I got it alllllmost where I want it. I'm gonna drive around at this setting for a week and take some measurements next weekend to see how everything has settled. Then I'll go from there.

Thanks again Larry, you have yourself one nice coilover!
Originally Posted by Gjohnson
Looks great, so how much do they run????
Originally Posted by MixSER6
It'll run you around $900, maybe less. Depending on shipping and payment method. 

I mentioned this above.
Looks good, Rob, glad things worked out. I'm sorry I missed the install party, but I know Pat and Jason were definitely more than qualified to do the job. I do want to check out the ride quality sometime, so maybe I'll give you a shout the next time I'm around Leesburg.
Btw, how much were these again?
Btw, how much were these again?
Originally Posted by Puppetmaster
Looks good, Rob, glad things worked out. I'm sorry I missed the install party, but I know Pat and Jason were definitely more than qualified to do the job. I do want to check out the ride quality sometime, so maybe I'll give you a shout the next time I'm around Leesburg.
Originally Posted by Puppetmaster
Btw, how much were these again? 

Originally Posted by Cutler
Looks Good Rob, too bad that Ahole got in front of me in the Neon otherwise I could have shown you what the little roadster can do
......
......
When I went around him during the passing zone and noticed that you didn't go....I figured you'd be pissed. I bet he sucked all the fun out of the twisties for you.
A few miles up the road I looked in my mirror and noticed a Miata darting around someone, I thought "that must be Jason".
Originally Posted by MixSER6

When I went around him during the passing zone and noticed that you didn't go....I figured you'd be pissed. I bet he sucked all the fun out of the twisties for you.
A few miles up the road I looked in my mirror and noticed a Miata darting around someone, I thought "that must be Jason".

Originally Posted by Cutler
Yeah, without alittle more room I couldn't do it, FI will aide that. You got around pretty quick, 130hp won't do it that fast

Originally Posted by MixSER6
I messed with the ride height more today, but I just couldn't get it perfect. Everytime I'd lower one wheel, the other side would be higher. Then I'd lower that and another wheel would be lower. And this merry-go-round went on for a while until I got it alllllmost where I want it. I'm gonna drive around at this setting for a week and take some measurements next weekend to see how everything has settled. Then I'll go from there. 

Make sure you are measuring on a level surface... Also, once you drop the car back down take it for a short spin then measure.
Don't get that @nal about it yet though... Let them settle for a good month otherwise you will go through all of it again once they really settle.
Originally Posted by upstatemax
Make sure you are measuring on a level surface... Also, once you drop the car back down take it for a short spin then measure.
Don't get that @nal about it yet though... Let them settle for a good month otherwise you will go through all of it again once they really settle.
Don't get that @nal about it yet though... Let them settle for a good month otherwise you will go through all of it again once they really settle.

Oh, I am doing this in my garage, which is pretty level (at least I hope it is).

Thanks.
looks good! To those trying to contact me, I hardly check the Larrio sn anymore, so just PM Larrio Motors instead. My apologies!
For those interested in buying these, I won't just sell to anyone. PM me, we'll talk about what your looking for in a suspension setup and your goals in mind. This way I can direct you towards a suitable purchase for YOU, whether it be my product or not. Keeping this business small makes it easier to manage.
Originally Posted by Larrio Motors
looks good! To those trying to contact me, I hardly check the Larrio sn anymore, so just PM Larrio Motors instead. My apologies!
For those interested in buying these, I won't just sell to anyone. PM me, we'll talk about what your looking for in a suspension setup and your goals in mind. This way I can direct you towards a suitable purchase for YOU, whether it be my product or not. Keeping this business small makes it easier to manage.
You got mail.
Cheers
AA
Thread
Thread Starter
Forum
Replies
Last Post
MikesChevelle
5th Generation Maxima (2000-2003)
4
Aug 6, 2015 11:36 AM







I have never heard of those, they look great.
