To anyone who has the HD Grill
#5
um..
i think hey just took of the finishing ring, then put a card board box behind it and took a magic marker and traced it from the out side in???? i dunno i might b wrong but.. thats how i would do it.. and when u do, do some thing like that make sure u leave like 4 or 2 1inch tabs to each cut out so u can have some thing to hold it in place when u put it in.. **and i'm talk'n about the mesh not the cardborad^^** thats how i would make the upper hd grill.. hum.. haha.. i think i'm gonna try it now... hahaha..
#6
Originally posted by VeggieH8R
Yes, I have seen the pretty picture from the last thread on this but no one answered how the templates were made. Dimensions woud be nice.
Yes, I have seen the pretty picture from the last thread on this but no one answered how the templates were made. Dimensions woud be nice.
#8
Sorry about not getting back to you guys...Here's what I did...cut 3 random pieces of cardboard about 28"long x 3"wide....the lower valence is about 29"long x 4"wide...these measurements are not what will fit directly into your grill, but must be trimmed into the opening...ok, start with the top...work your way from the left to the right...you kind of have to mold the cardboard (use some pressure to bend the cardboard corners)...trim outside of the desired outlining and keep trimming closer and closer till ya get a nice fitment...try to keep the bottom of the cardboard straight and aligned to the grills contour....here's the trick....once you get to the middle of the Nissan symbol your halfway, if what you've been trimming is to your liking, fold the carboard in half and trim the right side to the same dimensions...now all you got to do is make it sit properly and do the rest of the grill the same way...I hope this helps...?
#10
Originally posted by myktek
Hey veggie, forgot to ask you, is that pic from that movie Legend Of Speed?
Hey veggie, forgot to ask you, is that pic from that movie Legend Of Speed?
#11
ludacris I don't know if it's me...here check out my site
http://community.webshots.com/user/bighmann
http://community.webshots.com/user/bighmann
#13
Originally posted by big h
ludacris I don't know if it's me...here check out my site
http://community.webshots.com/user/bighmann
ludacris I don't know if it's me...here check out my site
http://community.webshots.com/user/bighmann
#14
JkiMaxAC..yep, i used nylon ties to hold the mesh in place. the side markers i tinted myself using a product called Nite Shades. It works just like spray paint...
Ludicris...I like it...I like it alot! I recieved many compliments about it..
Ludicris...I like it...I like it alot! I recieved many compliments about it..
Thread
Thread Starter
Forum
Replies
Last Post
REDinLV
7th Generation Maxima (2009-2015)
4
10-18-2015 05:31 AM