5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Window Issue

Thread Tools
 
Search this Thread
 
Old Dec 30, 2007 | 10:09 AM
  #1  
Professor's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Jan 2007
Posts: 2,375
From: Pittsburgh, PA
Window Issue

So i replaced the right rear window motor because it went down and never came back up, well i installed the new motor, same thing.......wtf, i swapped switches to no avail, i checked relays, fuses nothing is outa wack, i can manually put the window up with a battery and wires right to the motor..... but it just wont work like its ment to, any ideas ?
Old Dec 30, 2007 | 10:10 AM
  #2  
joshz's Avatar
Hova
 
Joined: Dec 2007
Posts: 51
From: Atlanta, GA
have you checked the track? maybe there's something blocking it?
Old Dec 30, 2007 | 10:11 AM
  #3  
Professor's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Jan 2007
Posts: 2,375
From: Pittsburgh, PA
Originally Posted by joshz
have you checked the track? maybe there's something blocking it?
its a new track and motor, if i hook power up to the motor it work smoothly both ways.
Old Dec 30, 2007 | 05:45 PM
  #4  
Professor's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Jan 2007
Posts: 2,375
From: Pittsburgh, PA
SIGH
Old Dec 30, 2007 | 06:18 PM
  #5  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
are ALL the switches good?
all the other switches work in a relay with the switches on the driver's door. if the driver's switch for that window isnt working, the switch on that window wont work.
Old Dec 31, 2007 | 09:01 AM
  #6  
Professor's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Jan 2007
Posts: 2,375
From: Pittsburgh, PA
Originally Posted by soonerfan
are ALL the switches good?
all the other switches work in a relay with the switches on the driver's door. if the driver's switch for that window isnt working, the switch on that window wont work.
Yeah, they all work, its odd, it will go down but not up.......iam gona recheck the switches, i did the LED mod to the switches, there is a small possibility that i messed something up
Old Jan 1, 2008 | 08:56 PM
  #7  
zero2sixtyZ's Avatar
You embarrass me.
iTrader: (30)
 
Joined: May 2005
Posts: 5,308
From: Malden, MA
Originally Posted by Professor`
Yeah, they all work, its odd, it will go down but not up.......iam gona recheck the switches, i did the LED mod to the switches, there is a small possibility that i messed something up
check the contacts inside the switch. my friend lost a few of them and i had to replace the switch to get it to work.
Old Jan 1, 2008 | 09:59 PM
  #8  
Professor's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Jan 2007
Posts: 2,375
From: Pittsburgh, PA
ive done that, it still wont work ><
Old Jan 1, 2008 | 10:20 PM
  #9  
spdfreak's Avatar
Senior Member
 
Joined: Sep 2005
Posts: 1,113
From: NY
Wire torn inside the plastic coating?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hez8813
5th Generation Maxima (2000-2003)
11
Mar 12, 2020 12:06 AM
The Frye
7th Generation Maxima (2009-2015)
12
Feb 3, 2019 08:34 AM
markevans999
3rd Generation Maxima (1989-1994)
7
Sep 10, 2015 04:29 PM
ef9
4th Generation Maxima (1995-1999)
5
Sep 5, 2015 11:18 PM
maximusrising
4th Generation Maxima (1995-1999)
3
Sep 4, 2015 06:31 PM




All times are GMT -7. The time now is 04:51 PM.