Maxxxed

iTrader: (3)

Some fu**er hit me on the passenger side of my 03 Max and broke the right side headlight. The only damage appears to be on outer lens. The crack is large enough that I won't be able to seal it properly and make it air tight.


Ignore all the nasty stuff on the car... I took the picture after it had just rained.


I called the dealer to find out if they sell just the headlight enclosure and he quoted $575 for the freaking enclosure... insane! The whole unit costs $700 if I wanted the bulbs with it.

I was just wondering if it would possible to buy just the outer lens? I can't find them anywhere.

I read up on one of the "how to's" on removing the outer lens. Now only thing I need to find is replacement lens (if they're sold seperately)... I am trying to fix this without buying an OEM or used headlight off ebay/car-parts.com.

I'd appreciate some advice.

Thanks.

harmbone2k2

iTrader: (1)

Well, your first step would be getting the guy who hit you to pay for it. You haven't stated anything about that though. Was it a hit'n'run?

RickyBobby

actually may be cheaper just to buy the whole headlight assembly from ebay or a auto recycler. it'll definately be a hell of a lot cheaper than 700.

SoonerFan

iTrader: (5)

the headlight is sold as a complete unit

Maxxxed

iTrader: (3)

His insurance accepted liability, but I am only getting about 70% compensation... there are other damages that occured internally to suspension, but it is hard to prove it happened after the accident. That's why I am trying to salvage this headlight so I can come up with some cash for other repairs.

I bought one on ebay, but I think its a stolen headlight because all the tabs are broken and it has a small crack on the lens too. I'll be sending it back.

I also tried car-parts.com, but most of the headlights there have some sort of damages on them...

SoonerFan

iTrader: (5)

$403

http://www.atozautolights.com/Search...002&Trim=Sny5r

Maxxxed

iTrader: (3)

Thanks! I will look into this. $400 is reasonable for a brand new unit. Definitely beats paying $700 to the stealer.

I also found this one on ebay:
http://cgi.ebay.com/ebaymotors/ws/eB...m=160242303326

Maxxxed

iTrader: (3)

Also, do you have a write-up on how to remove the actual headlight itself on 03 max? I removed the top two bolts off, but there is something else holding it back.

I had that Data Dots TSB done few years ago by the dealer. I don't know if that process involved additional reinforcement of the headlight assembly. Can someone point me what other bolts need to be removed? Thanks!

CMax03

iTrader: (3)

There may be that anti theft bracket installed, it's under the light behind the bumper fascia!

wyche89

does that data dots thing mean that the headlight has an anti-theft bracket on it? my headlights have those stickers on them too

SoonerFan

iTrader: (5)

"data dots" is a number on the unit for tracking purposes and different from the antitheft brackets.

RickyBobby

could also have been in an accident.

i'd check the local yellowpages call some auto recyclers .. minimize the amount you pay and you can find some good condition oem units.

Maxxxed

iTrader: (3)

Assuming that I don't have antitheft brackets, do you know if there are any other bolts, other than the top two? Thanks.

RickyBobby

i'm not 100% sure on the maxima but on my previous cars i've owned there's also two on the bottom as well.

ZIPPIN

iTrader: (32)

check this

http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=002

RickyBobby

CORRECTION: I just checked the factory service manual and it seems there's only two tabs and screws.

SoonerFan

iTrader: (5)

two top bolts + a tab on the outside and one on the bottom

SoonerFan

iTrader: (5)

those seem stolen

"Right side is still usable, but left side is for parts only."

"The right one can be used it just has upper inside mount broke off."

sergey85

iTrader: (2)

by u some aftermarket ones they are hell a cheap then when u get the money u can get the oem onez

sureal00

iTrader: (2)

My 03 max doesn't have bolts like the below maxima . There are like these flat heads instead of bolts.Am i suppose to use a special tool to take them off . They are rusted and don't look like reg bolts

sureal00

iTrader: (2)

bump

hi-tek22

iTrader: (4)

I would just yank the headlight out, makes everything easier to see......two bolts at the top a tab on the inner side...once you get the bolts off , just pull