i am looking to put some ES motor mount inserts in my car but i have the auto and the ES inserts are only for the manual trans cars. Its kinda hard to find a manual trans mount for 00-03 but heard the 95-99 may work it. Any one know if this is true and it will bolt up correctly?

All 95-03 MT front mounts will work, I just found a 95 front mount for $14.00, for my 03 SE Te auto.

I just bought the front and rear from http://www.nissan-auto-parts-dealer.com

$72.31/$64.95 respectively.

I have an auto and another member replied to my post that you need the manual motor mounts so I bought them tonight. I'll be using the ES inserts that I bought online. Learned the hard way by paying a local machine shop $114 to press out the inserts and back to them to press these.

Good luck.

i wonder if all of these will work
http://cgi.ebay.com/ebaymotors/95-01...Q5fAccessories

or maybe just this one for the front mount only

http://cgi.ebay.com/ebaymotors/NISSA...Q5fAccessories




Does the front mount from 95-99 still need to be from a manual trans car ?

95-03 manual trans car (front only), I've done this already(The ES bushing will not fit the 02-03 front auto motor mount) The bore is too large for the bushing...

Nice find. I was on ebay but didn't find that. I would've bought it.

i am still wondering if all 4 of those mounts are the same since those are for a 3.0 and i have the 3.5 . if they all would work i would buy these right now but not sure

I not sure why you guys are spending good money on a new/rebuild motor mount that's gonna be disassembled/ burned out/cut out for the ES bushing to be pressed in....buy some $14-20 mounts from the junkyard and remove them and reinsert the ES.

. That's a lot of money to spend to throw away the expensive stuff, the fluid-filled rubber bits.

Did the mounts and sub frames bushings today. Niiice.