Well I had a little incident with my Cattman Header skid plate.... I think my wife hit something and it cracked the front and side tack welds and eventually cracked the rear tack weld bouncing for god knows how long, which eventually cracked the last tack weld in the rear causing an exhaust leak and it broke off with a piece of the secondary pipes wall in my hand.....So I removed the Ypipe section and let my friendly welder fill the small hole and reweld the skid plat back on using "TIG" and utilizing larger welds for better solidity.....Meanwhile I talked to my welder about the Hybrid resonator Jig and he'll weld it up for $75 instead of the (2) previous quote for $500 and $750...Again the material cost a whopping $98...All I can say to everyone out there is always shop around.....cause there are some freakin thieves out there waiting on the meek & the weak!!!
Oh yeah my baby sounds like it's In-cabin sound level is now @ 54-56 dbs @ idle! Damn that was a good test drive......That 3" Cattman Hybrid Resonated Catback is intoxicatingly addictive as the Rpms climbs....

 

So what will be the price, same or less....sorry about the Skid plate....

 

Talked with Brian today and he is still figuring out how much it would be for his new version.

 

Im confused...I thought these were about to go into production? Is he still unsure about which resonator he is going to use? Is it because of price? Probably going to have to call in and speak with him directly, it's been rough sitting here not spending this exhaust money on other upgrades because I was told it would be to my door no later than March 1st, then the email I got today stated Im looking anywhere from 2nd to last week of March. Communication is key

 

Don't know Rod, that's Cattman's call.....Please be patient people the R&D portion is getting close to happening....The price shouldn't be a shocker but I'm sure it won't be Borla price range so CHILLAX! This is an awesome moment seeing the 3" make more progress in the field....and How much it's loved...the sound alone is intoxicating and addictive as hell.....even if I'm just going to pick up some milk and eggs, I'll tip into the throttle alittle just to hear and feel it's awesome presence......Please be patient it's not an overnight built catback! Never was is the past and never will be in the future!!!!!!

 

I callled just for the new resinator as i already have the rest of the setup but the drone every so often gets loud but other times it isn't there at all. I know he was waiting to hear back from his exhust guy, most likely they are still perfecting the design/setup hence why it is taking longer. As for the price it all dpends on what the material costs are once he starts teh production run and how many orders he has.

 

Curious about this. How does the group buy work? First timer... Lol.

 

Contact Brian now. Put up down payment, wait for batch production to be completed, receive parts. Enjoy.

 

 

Ok, how much is the down payment and when do I need it by? Lol guess I should call Brian on that... -___- where do I get his #?

 

His contact information is at the bottom of the first post here...
http://forums.maxima.org/5th-generat...rder-here.html

The deposit is $265. Total is 800 +S&H

 

They finally took the $265! Super glad because it was getting hard not to spend that on 6th gen brakes, audio upgrades, suspension parts, etc lol. Also, definitely call Brian if you are interested, he will break it down and answer any questions you have. He is the definition of good customer service and is a great example of why I will go out of my way to support small business owners who produce quality products, even if I have to pay a little more.

 

Awesome thanks guys, looks like he took deposits today so I won't be able to get it this time since i need like a week or so but ill be first on the next batch

 

He usually makes a few extra with each batch for late comers. Give him a call, might be able to work something out.

 

Nice, ok yea I should have deposit funds by Friday coming ill give him a call then and see what he says, thanks again guys!

 

Anyone else have the deposit put back into their account? Today there was no charge from cattman on my statement

 

If you're referring to the Hybrid Resonator section..... the same $300! Having a hard time ordering from this one company but it's all in progress and I'm shooting for mthis month to have 2 or 3 made....

 

Will probably see if I can get a shop to bust this for me in a couple months, since dont know the measurements and what not you took them from. Since on my Full Cattman with Fastcat was in the Heatshield knocking like a Mug, and had to get it shorten it.

On the 3'' Flanges can you provide a link Thanks....

 

I think being forced inducted plays a part in this. I would think there's not enough back pressure for a cutout to be sufficient in a N/A setup.

 

Not one person has experienced what I did with the deposit??? Alrighty!

 

Uhmm What is the best way to get in contact with Cattman directly? I tried pm and email..

 

Just call him. Never had a problem getting through that way. It's best too because he can answer questions directly and explain the process better.

 

I emailed him in regards to my deposit situation, and still nothing back. Looking like Ill call in the next day or two to see whats going on

 

Someone please PM me his number and I'll try that. Thanks in advance

 

^^http://lmgtfy.com/?q=how+to+contact+cattman

 

In addition to that,

Ever try the VERY first post of this very thread?
http://forums.maxima.org/7397730-post1.html

Seems legit.

 

Dats some purty pink typin you gots there Mrs.Mod!

 

Catches the attention of said poster, red is overplayed, cyan might be another option.

 

Fruity! But hows a pork belly wrapped stuffed rib eye roast sound?stuffed with feta,capers,tyme and gorganza and after roasting dropped in the deep fryer to crisp it up!

 

'parently cj be hungries!

That was some cute pink, it matches my g-string

 

Man, and I just had my lunch ... been messing with pork belly lately.

 

I think Cattman should ban you from ever having one of his fine products just because you wear a G-string infact NmexMax should ban you back to the 4th gen section!

 

1: Although mr Cattman does fine work, I already own a custom made 3 inch mandrel bent exhaust, with an hks muffler, I am good.
2: You are jealous that I have the body to propperly rock a g-string
3: NmexMax is enjoying watching us run amok

 

As long as it's not merrel bent with a twin loop and 3" ID.
Ok, sounds like a male stripper .... so, does that mean you're ....

I do enjoy it.

 

I def dont have an "O" pipe, its a custom test pipe iz very nice.


Not a male stripper, I just like giving CJ nasty mental images.


Our business is chaos, and business is good

 

Sorry to hear you can rock a g string...........

 

Hahahaha, touche' sir.

 

jus a random thought....i got a 02 max 6 spd and i love how ur car look dropped and was wondering how many inches dropped are those...and do u think 2,2 inches is too low becuase i dnt want it slammed or too too low for i do live in nyc which we all noe how tht goes

 

First post fail.

 

Who you be talkin wit?