Maxima Forums

5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

swap in progress 3.5 5sp vlsd.

Thread Tools
 
Search this Thread
 
Old 06-16-2010, 08:16 PM
  #1  
Member
Thread Starter
 
maxboy01AE's Avatar
 
Join Date: Apr 2009
Location: Brooklyn, NY
Posts: 234
swap in progress 3.5 5sp vlsd.
swap is done..
Last edited by maxboy01AE; 06-17-2010 at 07:43 PM.
maxboy01AE is offline  
Reply
Old 06-16-2010, 09:20 PM
  #2  
Junior Member
 
fpromax02's Avatar
 
Join Date: Jun 2010
Posts: 24
a friend and I r just finishing up a 3.5 swap in his A32 went pretty smooth...couple hick ups here and there...good luck.
fpromax02 is offline  
Reply
Old 06-16-2010, 10:23 PM
  #3  
Member
iTrader: (2)
 
LONERANGERSR20's Avatar
 
Join Date: Jan 2008
Posts: 201
ooo snap, AE wid 3.5 swap, dats wat up. who doin the swap for u?
LONERANGERSR20 is offline  
Reply
Old 06-17-2010, 12:02 AM
  #4  
Senior Member
 
CraigSE's Avatar
 
Join Date: Dec 2002
Location: London, ON, Canada
Posts: 595
Originally Posted by LONERANGERSR20
ooo snap, AE wid 3.5 swap, dats wat up. who doin the swap for u?
It looks like its being done in house.

Looks wicked man... Want to see progress!
CraigSE is offline  
Reply
Old 06-17-2010, 12:20 AM
  #5  
Newbie - Just Registered
 
yaboyrizzo's Avatar
 
Join Date: Oct 2009
Location: NEW YORK
Posts: 3
wass supp whos gettin the swap done how much u payin
yaboyrizzo is offline  
Reply
Old 06-17-2010, 04:49 PM
  #6  
Member
Thread Starter
 
maxboy01AE's Avatar
 
Join Date: Apr 2009
Location: Brooklyn, NY
Posts: 234
the swap im doing it myself and na this aint a house this is my shop. im following the 4th gen write up.. right im stuck cause i need camber adapters.. tensioner wont lined up with the block.. anybody have expireince this before.. is anything also i can do rather than buying cam adapters.. a
maxboy01AE is offline  
Reply
Old 06-17-2010, 04:52 PM
  #7  
Junior Member
 
MaxCrazy00's Avatar
 
Join Date: Jun 2010
Location: NY
Posts: 13
how much it cost you? all together/
MaxCrazy00 is offline  
Reply
Old 06-17-2010, 05:04 PM
  #8  
Senior Member
iTrader: (10)
 
Crusher103's Avatar
 
Join Date: Sep 2004
Location: Dur-ham NC
Posts: 54,041
i must say that is an interesting way to work on a motor.....
Crusher103 is offline  
Reply
Old 06-17-2010, 05:09 PM
  #9  
Member
Thread Starter
 
maxboy01AE's Avatar
 
Join Date: Apr 2009
Location: Brooklyn, NY
Posts: 234
800 motor 2200 tranny prolly like another 700 when im done
maxboy01AE is offline  
Reply
Old 06-17-2010, 05:45 PM
  #10  
My axles cry for mercy...
iTrader: (5)
 
essential1's Avatar
 
Join Date: Jul 2006
Location: Boynton Beach, FL
Posts: 1
Originally Posted by maxboy01AE
the swap im doing it myself and na this aint a house this is my shop. im following the 4th gen write up.. right im stuck cause i need camber adapters.. tensioner wont lined up with the block.. anybody have expireince this before.. is anything also i can do rather than buying cam adapters.. a
You can run your stock dek cams if you dont wanna use adapters if im not mistaken. Only way to run 3.5 cams is with adapters. Get them from stephenmax or JWT.

http://www.jimwolftechnology.com/cus...asp?PartID=491

You will also need the longer dowel pins with the JWT adapters.

Originally Posted by Crusher103
i must say that is an interesting way to work on a motor.....
I was thinkin the same thing
essential1 is offline  
Reply
Old 06-17-2010, 06:03 PM
  #11  
Senior Member
 
CraigSE's Avatar
 
Join Date: Dec 2002
Location: London, ON, Canada
Posts: 595
Originally Posted by maxboy01AE
the swap im doing it myself and na this aint a house this is my shop. im following the 4th gen write up.. right im stuck cause i need camber adapters.. tensioner wont lined up with the block.. anybody have expireince this before.. is anything also i can do rather than buying cam adapters.. a
Just for clarification, "in house" does not mean in a house, it means by the person who made the post.
CraigSE is offline  
Reply
Old 06-17-2010, 06:12 PM
  #12  
Senior Member
iTrader: (5)
 
Rods03Max619's Avatar
 
Join Date: Oct 2009
Location: Diego,California
Posts: 8,949
**** looks pretty wicked don't know if I would have the ***** to do this but good luck!!
Rods03Max619 is offline  
Reply
Old 06-18-2010, 08:28 AM
  #13  
Senior Member
iTrader: (6)
 
Unklejoe's Avatar
 
Join Date: Aug 2008
Location: Gloucester County NJ
Posts: 1,147
Love that you chose to go with a 5 speed.

Sometime I think that if I had a 5 speed, I'd actually be faster...
Unklejoe is offline  
Reply
Old 06-18-2010, 08:34 AM
  #14  
Member
iTrader: (2)
 
LONERANGERSR20's Avatar
 
Join Date: Jan 2008
Posts: 201
Originally Posted by maxboy01AE
swap is done..

car runnin good?
LONERANGERSR20 is offline  
Reply
Old 06-18-2010, 03:19 PM
  #15  
Senior Member
 
Christobal65's Avatar
 
Join Date: Jun 2005
Location: Sacramento
Posts: 383
Originally Posted by Unklejoe
Love that you chose to go with a 5 speed.

Sometime I think that if I had a 5 speed, I'd actually be faster...
The gear ratios and the final drive ratio on the 6spd in the 02-03 are nearly identical to the 5spd's gear ratios.
Christobal65 is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Need a consult before replacing fuel injector again...
jmlee44
4th Generation Maxima (1995-1999)
8
10-02-2022 02:13 PM
for 2k2 2k3 owners, if you need a new MAF...
TallTom
5th Generation Maxima (2000-2003)
50
07-08-2022 09:54 AM
TX 2010 Nissan Maxima SV Premium Package
Fbana41
Maximas for Sale / Wanted
3
08-29-2016 12:18 PM
2002 maxima se issues
09maxshawn11
5th Generation Maxima (2000-2003)
5
09-30-2015 10:28 AM
1989 Nissan Maxima Brakes stuck on
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM
Back to Subforum
5th Generation Maxima (2000-2003)
View Next Unread
HELP: 5 spd stalling in reverse




Advanced Search
Quick Reply: swap in progress 3.5 5sp vlsd.


Reply Closed Thread Share

All times are GMT -7. The time now is 08:34 AM.