What do you do to make your engine look pretty? :)
02-08-2012, 08:38 AM
#1161
Let's see. Show it off.
02-08-2012, 08:52 AM
#1162
Hookay then. This is not the latest engine bay shot. Since then I have changed the coolant return hose to a black silicone. The rest of the bay still looks the same but I do have some ideas in mind.
02-08-2012, 09:02 AM
#1165
And to think what that setup can do inside a lightweight 4th gen. That's an amazing sight. It truly is.
I wonder if that IM would clean up with some elbow grease and metal polish? Of course, you could also take it to a shop for professional blasting and polish.
Love the custom radiator tie-downs, and the red anodized aluminum pieces on the Turbo, particularly with the red rubber couplers.
Shift_Max, consider me duly impressed. Well done, sir.
(OAN, ditch the yellow reservoir caps.)
I wonder if that IM would clean up with some elbow grease and metal polish? Of course, you could also take it to a shop for professional blasting and polish.
Love the custom radiator tie-downs, and the red anodized aluminum pieces on the Turbo, particularly with the red rubber couplers.
Shift_Max, consider me duly impressed. Well done, sir.
(OAN, ditch the yellow reservoir caps.)
Last edited by Rochester; 02-08-2012 at 09:09 AM.
02-08-2012, 09:22 AM
#1167
My Gawd Shift Max that is one very sweet looking Turbo setup you have in there, I am super impressed. A few more minor tweaks as you have suggested and swap a few more bolts for some purdy Titanium ones and the Holy Sh$t ... great job
02-08-2012, 01:22 PM
#1169
If you want to do something about the valve covers you can get new ones and paint them red to match the red theme you got there. Just a suggestion. I also believe that z toyz website sells caps for the brake fluid, steering wheel fluid, radiator, windshield fluid....you can order those in red and it will make things look good. Again, just another suggestion.
02-08-2012, 07:15 PM
#1171
02-09-2012, 06:24 AM
#1173
The battery is in the trunk.
The upper radiator hose was an experiment with the heat film. I don't know if I should keep it or remove.
02-10-2012, 07:20 AM
#1175
So I placed an order for the black coolant and brake fluid reservoir caps. For those that are interested in buying some, I found them listed under the 2009
+ Nissan Murano.
02-11-2012, 02:22 PM
#1179
Where did you find that?I've been slowly hording Nismo doodads for the car for awhile and have not seen that pretty little item!btw did you know Nismo has SS T hose clamps with the Nismo engraved into the band.
02-11-2012, 02:50 PM
#1180
So you like it? I rather do too, which is why I threw it out there. It's really inexpensive, want to guinea pig the cap?
02-11-2012, 03:00 PM
#1181
Ebay, here's the link. Search the phrase "radiator cap cover".
So you like it? I rather do too, which is why I threw it out there. It's really inexpensive, want to guinea pig the cap?
So you like it? I rather do too, which is why I threw it out there. It's really inexpensive, want to guinea pig the cap?
02-12-2012, 06:59 AM
#1185
Things like this are from ebay stores (not private sales) that live and die based on having a +99% customer feedback. In this context, your fears are misplaced. I've bought countless dozens and dozens of little stuff like this off ebay in the last few years, and only once have I ever had an issue. In that case, the seller went out of business after I placed my order, and ebay support refunded my $20 or whatever it was.
02-12-2012, 07:02 AM
#1186
@customlowz - thanks for the reminder and the pics.
The cap looks somewhat large and out-of-place, while at the same time looking attractive and appropriate. I don't know where the disconnect is. Maybe it's the Maxima engine bay layout. I need to let this rattle around in my head for a while.
Did you need to use any adhesive on the cap, or is the little allenhead retainer screw enough?
The cap looks somewhat large and out-of-place, while at the same time looking attractive and appropriate. I don't know where the disconnect is. Maybe it's the Maxima engine bay layout. I need to let this rattle around in my head for a while.
Did you need to use any adhesive on the cap, or is the little allenhead retainer screw enough?
02-12-2012, 07:31 AM
#1187
I had bought the oil cap AND radiator cap with the Nismo sticky on it. Its some peel off adhesive GARBAGE that actually fell off (maybe due to the heat under the hood or whatever). The one on the oil cap kinds stay on, but the one on the radiato just keeps falling off, maybe its the heat. I thought it was better to pay $20 for a nismo cap than to pay $80 for the REAL Nismo oil cap. I plan on getting rid of BOTH of them and just getting the OEM Nismo stuff. No more stickers for me. Anyway the logo looks exactly the same and I would assume its the same adhesive. I'm sure others probably have the same adhesive and had no problems, but I know how particular you are because you dont like cheap crap and if you did get it and it fell off you would be highly disappointed just like I was!
02-12-2012, 12:51 PM
#1189
Maby Rochester should design a bunch of fancy doodads for under the hood and have them made out of Ti.I would buy it as prob most of the org would also.Just think a custom Ti short Ram with matching brackets and hardware.
02-12-2012, 01:03 PM
#1190
I took someone's engine bay shot and shopped what it could look like.
Hmm. I'm on the fence. It looks like something I should buy and play with. It's a solid aluminum piece... I bet it could be painted gunmetal so that it blends, rather than stands out in red.
Hmm. I'm on the fence. It looks like something I should buy and play with. It's a solid aluminum piece... I bet it could be painted gunmetal so that it blends, rather than stands out in red.
02-12-2012, 01:07 PM
#1191
Rochester i think you should invest in a home powdercoater for $100 from eastwood.com then you can do any color you want anytime you want it.
03-02-2012, 04:39 PM
#1193
Look at what I just found on Amazon. I like the looks (online, at least) better than the red one from a few posts ago. I just ordered it in gunmetal. And a couple dozen VMS fender washers (in black) for the engine bay.
When I got the gunmetal VMS Fender Washers in last week, I decided they would look best with the license plate frame, and that black works better in the engine bay. So two packs of 10 in black.
When I got the gunmetal VMS Fender Washers in last week, I decided they would look best with the license plate frame, and that black works better in the engine bay. So two packs of 10 in black.
Last edited by Rochester; 03-03-2012 at 05:25 AM.
03-02-2012, 05:54 PM
#1194
Look at what I just found on Amazon. I like the looks (online, at least) better than the red one from a few posts ago. I just ordered it in gunmetal. And a couple dozen VMS fender washers (in black) for the engine bay.
When I got the gunmetal VMS Fender Washers in last week, I decided they would look best with the license plate frame, and that black works better in the engine bay. So two packs of 10 in black.
When I got the gunmetal VMS Fender Washers in last week, I decided they would look best with the license plate frame, and that black works better in the engine bay. So two packs of 10 in black.
That red one is hideous, IMO.
03-02-2012, 07:35 PM
#1195
Niiice dude. Post the link i may try this also, this is the best looking rad cap i've seen so far. Too bad they wrecked it by putting so much writing on it. Wonder if that can be removed easy..... or coverd up cleanly with something else.
That red one is hideous, IMO.
That red one is hideous, IMO.
Often stuff like this comes with the center sticker separate. That's how I'm hoping this comes, because I'd also like it without all the writing in the middle. I guess I'll find out next week.
And yes, I'm dressing up the G's engine bay a little bit. But just a little.
03-02-2012, 07:46 PM
#1196
it's all good, better to do it now while it's still pristine, easier to keep it that way.
or at least, sounds like something to help 'reason' these little mods out. I'd run with it.
Post results about sticker mounted/unmounted!
Have you thought about doing the simple wire tuck on the big loomed wires that come out of your battery area?
or at least, sounds like something to help 'reason' these little mods out. I'd run with it.
Post results about sticker mounted/unmounted!
Have you thought about doing the simple wire tuck on the big loomed wires that come out of your battery area?
03-02-2012, 07:48 PM
#1197
Member
Join Date: May 2011
Location: Suffolk, Long Island
Posts: 72
Also, I do not believe the "little bit" part of your post. We all know it gets addicting...
03-02-2012, 07:51 PM
#1198
To be honest, my garage isn't heated, and it's still winter. Plus, it's only been a month, and I was away on vacation for half that time. My point being, I've got all kinds of valid excuses for not obsessing over the car yet.
But I'll get there.
03-03-2012, 04:59 AM
#1200
Yeah no doubt. I will likely skip this task on mine but mainly because the car's black so you don't really see them. They really pop in your bay (I know pictured isn't your actual bay).