5th gen Off Topic Thread (Official Ghustle thread v1)
Get brackets made out of Ti sheet
It must be for the pretty. Personally, I think most hoses should be black, but he's got a pretty serious blue theme going on. I'd like to see pics. Might look good.
ranmas2004, pull the little hose off the rad overflow port and measure the ID.
I'm still LOL over here, man.
ranmas2004, pull the little hose off the rad overflow port and measure the ID.
I'm still LOL over here, man.
BEEN LIKE THIS FOR THE LAST 2 WEEKS.....CMON:
As much as I do want a bike, I know for damn sure I'd kill myself on one.
But a G37S w/ full bolt-ons, tune, SSR Type-Cs 18F and 19R would end any and all desires for cars.
Has to be red of course.
Then when the weekend comes I'll take the red race car (Maxima) out and terrorize the streets.
But a G37S w/ full bolt-ons, tune, SSR Type-Cs 18F and 19R would end any and all desires for cars.
Has to be red of course.
Then when the weekend comes I'll take the red race car (Maxima) out and terrorize the streets.
Smile of the day
A man, wanting to rob a downtown Bank of America, walked into the branch & wrote “this iz a stikkup. Put all your muny in this bag.” While standing in line, waiting to give his note to the teller, he began to worry that someone had seen him write the note and might call the police before he reached the teller's window. So he left the Bank of America and crossed the street to Wells Fargo. After waiting a few minutes in line, he handed his note to the Wells Fargo teller. She read it and surmising from his spelling errors that he wasn’t the brightest light in the harbor, told him that she could not accept his stickup note because it was written on a Bank of America deposit slip and that he would either have to fill out a Wells Fargo deposit slip or go back to Bank of America. Looking somewhat defeated, the man said, “OK” and left. He was arrested a few minutes later, as he was waiting in line back at Bank of America.
A man, wanting to rob a downtown Bank of America, walked into the branch & wrote “this iz a stikkup. Put all your muny in this bag.” While standing in line, waiting to give his note to the teller, he began to worry that someone had seen him write the note and might call the police before he reached the teller's window. So he left the Bank of America and crossed the street to Wells Fargo. After waiting a few minutes in line, he handed his note to the Wells Fargo teller. She read it and surmising from his spelling errors that he wasn’t the brightest light in the harbor, told him that she could not accept his stickup note because it was written on a Bank of America deposit slip and that he would either have to fill out a Wells Fargo deposit slip or go back to Bank of America. Looking somewhat defeated, the man said, “OK” and left. He was arrested a few minutes later, as he was waiting in line back at Bank of America.
LOL, I knew you'd like that..LOL. I was laughin typing it. I found a company in CALI of course that sells them in 7mm and 6mm. I might just order both. Yeah, going hard on the blue theme. Even got blue heat wrap for the exhaust side of the turbo. It'll be nice once its all put together. You'll see.......if they ever finish my car this year I can clean up the engine bay a bit..... I went to see the progress today........SAME SHYT as LAST WEEK.....sitting there with freakin feedpipe welded up into engine bay with no turbo on it...no intercooler pipes....no turbo mounted...NOTHING. The owner said welder coming this week to finish....we will see........ALL DAM DAY with this shop.....FANTASTIC WORK....but SUPER DUPER SLOW.
BEEN LIKE THIS FOR THE LAST 2 WEEKS.....CMON:
BEEN LIKE THIS FOR THE LAST 2 WEEKS.....CMON:
On the red car the Popcharger just killed my power, car was awesome in the city, but @ WOT it was miserable, would not redline for chit.
LOL, I knew you'd like that..LOL. I was laughin typing it. I found a company in CALI of course that sells them in 7mm and 6mm. I might just order both. Yeah, going hard on the blue theme. Even got blue heat wrap for the exhaust side of the turbo. It'll be nice once its all put together. You'll see.......if they ever finish my car this year I can clean up the engine bay a bit..... I went to see the progress today........SAME SHYT as LAST WEEK.....sitting there with freakin feedpipe welded up into engine bay with no turbo on it...no intercooler pipes....no turbo mounted...NOTHING. The owner said welder coming this week to finish....we will see........ALL DAM DAY with this shop.....FANTASTIC WORK....but SUPER DUPER SLOW.
BEEN LIKE THIS FOR THE LAST 2 WEEKS.....CMON:
[IMG]http://farm8.staticflickr.com/7211/7367756872_31ded4b0e5_z.jpg[IMG]
BEEN LIKE THIS FOR THE LAST 2 WEEKS.....CMON:
[IMG]http://farm8.staticflickr.com/7211/7367756872_31ded4b0e5_z.jpg[IMG]
Pops if you said 4 years I'd seriously plan the next 4 years of classes right now to graduate by this date.
But 8 is too damn long, even I would want to have a little brat running around by then
LOL, I knew you'd like that..LOL. I was laughin typing it. I found a company in CALI of course that sells them in 7mm and 6mm. I might just order both. Yeah, going hard on the blue theme. Even got blue heat wrap for the exhaust side of the turbo. It'll be nice once its all put together. You'll see.......if they ever finish my car this year I can clean up the engine bay a bit..... I went to see the progress today........SAME SHYT as LAST WEEK.....sitting there with freakin feedpipe welded up into engine bay with no turbo on it...no intercooler pipes....no turbo mounted...NOTHING. The owner said welder coming this week to finish....we will see........ALL DAM DAY with this shop.....FANTASTIC WORK....but SUPER DUPER SLOW.
BEEN LIKE THIS FOR THE LAST 2 WEEKS.....CMON:
BEEN LIKE THIS FOR THE LAST 2 WEEKS.....CMON:
And look at you with the VMS radiator cap cover. How are you liking that snazzy wording printed on the cap?
"High Performance Aluminum Radiator Protection Cover"
LOL, I knew you'd like that..LOL. I was laughin typing it. I found a company in CALI of course that sells them in 7mm and 6mm. I might just order both. Yeah, going hard on the blue theme. Even got blue heat wrap for the exhaust side of the turbo. It'll be nice once its all put together. You'll see.......if they ever finish my car this year I can clean up the engine bay a bit..... I went to see the progress today........SAME SHYT as LAST WEEK.....sitting there with freakin feedpipe welded up into engine bay with no turbo on it...no intercooler pipes....no turbo mounted...NOTHING. The owner said welder coming this week to finish....we will see........ALL DAM DAY with this shop.....FANTASTIC WORK....but SUPER DUPER SLOW.
BEEN LIKE THIS FOR THE LAST 2 WEEKS.....CMON:
BEEN LIKE THIS FOR THE LAST 2 WEEKS.....CMON:
The contractors pyramid lol. Fast+cheap=not good, Fast+good=not cheap, Good+cheap=not fast
I like this jag best:
http://en.wikipedia.org/wiki/Jaguar_XJ220
GTK. I surpose that makes sense in the cable setup because you're basically prying against that mount during shifting. Where with a linkage it's just a ball-socket that transfers the pivot, so there's not really any force/wear there.
Strange setup this cable. Glad not to have it, have to say.
http://en.wikipedia.org/wiki/Jaguar_XJ220
You're right, that's what I'm talking about. But you're wrong that they don't wear our and don't need replacement.
After 8 years or more, they are certainly worn out, crushed and sloppy. Energy Suspension makes replacement bushings for the 4 contact points under the shifter assembly that's bolted to the floor. Replacing them makes a pretty noticeable difference on an old 6MT.
After 8 years or more, they are certainly worn out, crushed and sloppy. Energy Suspension makes replacement bushings for the 4 contact points under the shifter assembly that's bolted to the floor. Replacing them makes a pretty noticeable difference on an old 6MT.
Strange setup this cable. Glad not to have it, have to say.
eh? Little pricey but seem nice. Obviously not for me lol
http://www.twmperformance.com/shorts...rtshifters.htm
http://www.twmperformance.com/shorts...rtshifters.htm
Thanks, Im trying...not done yet, its gonna look really good when Im finished.
eh? Little pricey but seem nice. Obviously not for me lol
http://www.twmperformance.com/shorts...rtshifters.htm
http://www.twmperformance.com/shorts...rtshifters.htm
Soo more research makes me glad I haven't bought that 8.5:1 engine yet. Seems that might be way to low on Compression for the Centrifugal SC unless I go ape-chit with it and run 15+ psi and T-Trim the compressor wheel to produce better boost across the range........
Still reading though, because I think I can get it for under $2200 shipped
Still reading though, because I think I can get it for under $2200 shipped
Soo more research makes me glad I haven't bought that 8.5:1 engine yet. Seems that might be way to low on Compression for the Centrifugal SC unless I go ape-chit with it and run 15+ psi and T-Trim the compressor wheel to produce better boost across the range........
Still reading though, because I think I can get it for under $2200 shipped
Still reading though, because I think I can get it for under $2200 shipped
Yall fools need to hop on battlefield3 Foreal. After playing that, cod aint ****.
Against my better judgment, I rode a friends bike this weekend. Cbr600.
As much as I do want a bike, I know for damn sure I'd kill myself on one.
But a G37S w/ full bolt-ons, tune, SSR Type-Cs 18F and 19R would end any and all desires for cars.
Has to be red of course.
Then when the weekend comes I'll take the red race car (Maxima) out and terrorize the streets.
But a G37S w/ full bolt-ons, tune, SSR Type-Cs 18F and 19R would end any and all desires for cars.
Has to be red of course.
Then when the weekend comes I'll take the red race car (Maxima) out and terrorize the streets.
sure it could, but it'd throw a different code. flashing CEL= misfire. whether or not it's caused by coil or injector, the code should tell ya, I'd think.
Nice delivery on that, t_behr. Made me laugh.
I don't know bikes at all. Not one bit. But this takes a nice picture.
You know, if you turn around backwards on this bike seat, it would look like you're riding down the road with a 2 foot erection.
I don't know bikes at all. Not one bit. But this takes a nice picture.
You know, if you turn around backwards on this bike seat, it would look like you're riding down the road with a 2 foot erection.
Last edited by Rochester; 06-18-2012 at 06:00 PM.
Soo more research makes me glad I haven't bought that 8.5:1 engine yet. Seems that might be way to low on Compression for the Centrifugal SC unless I go ape-chit with it and run 15+ psi and T-Trim the compressor wheel to produce better boost across the range........
Still reading though, because I think I can get it for under $2200 shipped
Still reading though, because I think I can get it for under $2200 shipped