i dont get why the car HAS to be on 'real wheels' to be stanced, besides whose to say teh wheel is fake, it doesnt seem imaginary to me




i'll never say a fake wheel > real wheel, they both serve their purpose, i look at 'fake wheels' as a perfect daily wheel, i personally cant see driving daily on an expensive set of wheels. but i'd daily teh **** out of a nice set of xxrs or varrosteons

 

Why? Please tell me why a car under 3k lbs needs 17x9s?

 

Wait. What happened?

 

what you need me to look for?

 

You want to put a VQ35 under the hood of your car and road race it, correct? with a Sentra's 6spd? Spin city b1tch. 1st AND 2nd gear will be problematic and dont tell me you plan to put a 245 on a x8 because that aint gonna help.

unless you are gonna run slicks but even then.....

 

who?

because stance

 

That wheel debate was pointless.

 

17" 5 SPOKE Matte Black RaceSPEC Wheels 5x114.3 - $600 (kingwood)

 

Nobody said it as to be on real wheels but stance is a game about i spent the money on good parts. If you want to play you have to pay its just that simple. Look at the 2 cars i posted on the last page and you will understand my point.

 

Surching

I mean, FWIW, I'd get a set of fake rims as DD's, and leave the real rims at home, in a box, ready to be bolted on if I'm going to a show.

Especially with the roads the way they are here in Nashville, I'd HATE to drive on a set of expensive rims, and risk curb rash.

What people don't understand, too, is that you can get a LOT of nice, name-brand rims for the same price as some of the fake rims. It's a matter of shopping.

Then again, I still have no issue whatsoever with fake rims. Rota is obviously making a name for themselves, considering they've been used by a few cars in racing circuits.

I want the gunmetal or the gold RPF-1's. I'm still on the fence. When I had my Rotas, the gold looked gorgeous up against the black car.

The only car that's slammed that I have serious respect for is Rusty Slammington. And that's only because Mike went above and beyond with that car. It was more than just putting it on airbags and setting it on the ground.

I'm also pretty positive his car has a bigger contact patch in the rear end than 99% of these hellaflush fanboys.

F*ck off and go wrap your intake in some plaid fabric. Calling parts like Wilwood and Bride knock-off? You must either love trolling or be a complete moron.

 

17" Works wheels n tires for S2000, Civic, Accord... - $700 (Bellaire n Beltway 8/Hwy 6)

 

Rota Slipstreams 5x114.3 S2000 - $500 (I-10 & Elderidge)

 

Back a few pages, Clashez tried to blame his poor English on attention hypertension disorder.

What I, and Waxima, came to conclude is that we THINK he meant attention deficit hyperactivity disorder. But we can't really be all that sure with Clashez.

 

I've never been a big fan of Slipstreams.

Until I saw them on a 1st gen xB the other day. MAN, did they look good on that shoe box.

 

that car is on SSRs aswell.

Clashez is just stupid. I want to lobby to get him on forum wide ignore. So nobody has to see his stupid BS.

 

i 100% agree, it's a tireless ignorant deadbeat subject. IMO you calling someone who has knock off wheels insignificant in all aspects of life because he decided to get a 'real' set of wheels

meh, i'm not a person that's big on material. yea the guy spent more on teh volks, but just because he spent more money on the wheels makes his car that much better? granted, that day i posted up the vid about the RX7 that had the P45s on it w/ all that other 'quality work' that was done and it caught fire, i do believe if you go all out on a vehicle, a wheel is nothing to get a knockoff version on. but even if still, if it looks fine, it is what it is. i appreciate the knockoff just like the real deal...if they are side by side and it just so happens that the person who did a better execution w/ the knock off wheel and it looks better setup than the real deal, i'm giving credit where it's due, that's just me

 

Noted, thank you. I plan on doing a cut-off mod to them, so hopefully they'll turn out alright.

 

RFP1s 17x8 35 offset 2 or 4.

DOT Approved (Well at one point in time they were... But I get by on street classes inspectors that aren't suuuper good @ their job ) Slicks, and I don't think I've ever used 2nd gear unless I fck up on a road course.

Smoking Joe uses 225s, that's good enough for him, same for me.



Whatever viciousmo

 

I vote Crusher for Forum Prezdent!!!!

 

one of my favorite wheels...i want rota slips polished for the beater

 

No its beyond that, i think it just full blown mental retardation. There is just no other excuse for it. All his past purchases and what he post about....Its the only conclusion i can come up with. I may say stupid **** from time to time but i say it as a joke im not going to lower myself to try and reason with a retard.

 

I don't often wish that people would get hit by a freight train. I'm generally a pretty nice and accepting guy when it comes to people.
































But him.
































































He's the exception.
























































Freight train away.

 

i have no problem what so ever with knockoffs, i like em too, but i know their place. And i think everybody else on here should learn their place aswell. im not going to come on here and brag about $600 wheels like what i have seen happen a few times.

 

My car is an 03 buddy with 80 thousand on the clock... don't make me LOL with fresh paint job and every thing.. I could bury with the money I got in the engine alone ..lol please don't make me go down the mod list..

 

Clashez=XXR are the best thing sense sliced potato bread

sorry phatboi you know nuttin bout da potato breads

 

I'm just sick and tired of hearing him "call me out," trying to get ME to drive three fawking hours to "race" him.

If he wants to "race" me so bad, he needs to come to Nashville and call me out. And if he does, it's not going to be a straight-line race, oh no. I want to see that shoddy eBay suspension do work. We're going backroad driving.

Honestly, it'd be worth it to me to drive three hours to where he lives just so I can set that thing he calls a "stanced" car on fire.

 

You are gonna spin 2nd if you are on a tight course. i would go for some 245s on a x9 or 255s on a 9.5. But if its on a long course than i can see why. I would still go for a wider wheel.

 

A VQ35 with an SAFC-II, cold air intake, exhaust (with multiple restrictions in it), (supposed) rev-up cams (which will do NOTHING without the supporting retaining clips/springs/valves that will allow you to rev higher), a port and polish, and a block off plate?

Yeah, your car is going to STOMP on Shift_Max's turbo car.

I swear to God, every time he opens his mouth, it's like watching Fast and Furious all over again.

 

oh this mod list i have to see, please explain your mods.

 

None of those wheels are light enough CJ :sadpace

Thanks though.

 

See what im saying, retard.

 

fixed

 

i seen some 5kg 17x9 +40 titanium wheels but you gonna have to hustle a crap load of parts and sell a kidney for those

 

this mod list must be seen, this is the last thing i want to see from clashez because he was bragging about his mod list a couple of weeks ago and still hasnt produced. lets see it.

 

mod list please. Let's compare.

 

Ebay intake, ebay exhuast, ebay headers, ebay coilovers, ebay wheels, ebay driver=clashez mod list

 

I repeat.

I have never used 2nd gear on a road course (unless I made a mistake).

Not this one:



Nor this one:

http://www.trackpedia.com/mediawiki/.../Noproblem.jpg

Or this one:


Grand Sport Speedway, Houston, TX

I have a short geared 6MT for a reason.

 

http://killeen.craigslist.org/pts/3007882174.html

 

Mod list plus price of mods and we will go from their and find out who really does have the cheaper car

 

1 $130 xxr wheels
2 funky CF hood
3 riceboy stickers
4 cheap no name wannaby coil over system
5 bullshat plaid wrapped inside
6 cheap non SS exhaust with Twin Fail Potato cannon muffler
7 You (Clashez)