longer wired o2 sensors?? does it exists?
longer wired o2 sensors?? does it exists?
Last edited by Grand_hustle17; May 21, 2012 at 06:05 AM.
I couldn't find one either... What I did was make a custom extension for my 02 sensor (on the engine side for bank 1 sensor 1 (under the firewall). I bought some high temp wire and took a bad sensor and disassembled the plug. I soldered the wires onto the pins from the bad plug, and put all back together. Made everything plug-n-play, and since i did that Ive put about 2k miles onto the car with no CEL's. Before (when i had the O2 wire extended) i couldn't go past 40 miles without the light.
I couldn't find one either... What I did was make a custom extension for my 02 sensor (on the engine side for bank 1 sensor 1 (under the firewall). I bought some high temp wire and took a bad sensor and disassembled the plug. I soldered the wires onto the pins from the bad plug, and put all back together. Made everything plug-n-play, and since i did that Ive put about 2k miles onto the car with no CEL's. Before (when i had the O2 wire extended) i couldn't go past 40 miles without the light.
Last edited by Grand_hustle17; May 21, 2012 at 07:53 AM.
but instead of doing the extension i just wanna buy a longer bank 1 sensor 1 o2 sensor... the reason im a lil skeptical on the extention is because the connector piece doesnt look similar to the way the connector is on the o2 sensor
hey, whatever you want... I just made myself an extension, leaving the O2 sensor alone. Its all plug and play, just like the link above, but I made it myself instead of buying it.
not that im not up for trying that... just dont have a solder gun and wanna do it the easiest way possibly, even if i have to spend the lil extra $$$
So extension(part number 109247) is a fit to the current 02 connector?
Link:
http://www.casperselectronics.com/st...948169946649e7
Link:
http://www.casperselectronics.com/st...948169946649e7
Thread
Thread Starter
Forum
Replies
Last Post
