Lost only key
07-07-2013, 01:08 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2011
Posts: 52
Lost only key
Hey guys went out and lost my only key I have an 03 max do I have any options besides towing to the dealer and if I have to do that does anybody know how expensive it is to have a new key made
Thanks guys
Thanks guys
07-07-2013, 02:01 PM
#3
#TEXAS
Tip: (op)if you do call the locksmith i advise you to buy two keys from'em since you should get the second one already programmed for like $40...if you can haggle a little..
Last edited by nestorlugo; 07-07-2013 at 02:11 PM.
07-08-2013, 03:02 PM
#7
07-08-2013, 07:34 PM
#9
Can locksmiths cut keys from vin? I thought only the dealer could do that, and then only within 10-12 year period.
Answer your question, dealer is going to be massively expensive. When I was looking to just get a spare key, dealer was going to be roughly $200 for key, cut, and programming.
I got an eBay chip key that also came with a non chip key for my wallet in case I lock my keys in my car - paid about $25. Had a locksmith cut and program my key in about 30 minutes for about $40. But, I still had my original key which they were able to copy.
Answer your question, dealer is going to be massively expensive. When I was looking to just get a spare key, dealer was going to be roughly $200 for key, cut, and programming.
I got an eBay chip key that also came with a non chip key for my wallet in case I lock my keys in my car - paid about $25. Had a locksmith cut and program my key in about 30 minutes for about $40. But, I still had my original key which they were able to copy.
Last edited by Chris Gregg; 07-08-2013 at 07:39 PM.
07-08-2013, 07:46 PM
#10
I don't think the locksmiths can cut keys from the VIN. But they can cut a key from the lock cylinder. I had that done on my 97 about 2 years ago when I realized that the key was having problems unlocking the doors and turning the ignition switch.
I took the hardly used lock cylinder out of the passenger door (I know I know 5th gens don't have one) and took it to the local locksmith. The have a device that they put in the lock and it "reads" the tumblers and then they can cut a key. Boy, did that key look a lot different from the worn out one I was using.
Since I wasn't locked out, I didn't have to pay for a service call. I did this because 97s are before Nissan started their key code registry and the dealer couldn't cut me a key.
I took the hardly used lock cylinder out of the passenger door (I know I know 5th gens don't have one) and took it to the local locksmith. The have a device that they put in the lock and it "reads" the tumblers and then they can cut a key. Boy, did that key look a lot different from the worn out one I was using.
Since I wasn't locked out, I didn't have to pay for a service call. I did this because 97s are before Nissan started their key code registry and the dealer couldn't cut me a key.
07-09-2013, 02:18 PM
#13
Can locksmiths cut keys from vin? I thought only the dealer could do that, and then only within 10-12 year period.
Answer your question, dealer is going to be massively expensive. When I was looking to just get a spare key, dealer was going to be roughly $200 for key, cut, and programming.
I got an eBay chip key that also came with a non chip key for my wallet in case I lock my keys in my car - paid about $25. Had a locksmith cut and program my key in about 30 minutes for about $40. But, I still had my original key which they were able to copy.
Answer your question, dealer is going to be massively expensive. When I was looking to just get a spare key, dealer was going to be roughly $200 for key, cut, and programming.
I got an eBay chip key that also came with a non chip key for my wallet in case I lock my keys in my car - paid about $25. Had a locksmith cut and program my key in about 30 minutes for about $40. But, I still had my original key which they were able to copy.
Sent from my iPhone using MaximaOrg
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM