precat problem
#41
#42
Did you guys do anything to make sure your bank 2 precat seals at the manifold after the crush washer is no longer in play? I did not want to have to take it all back apart to fix a leak so I made a gasket from some gasket material I had.
#43
I just used some of the red RTV sealant, I've never had an exhaust leak, and it's been almost 10K miles sense I installed everything.
Also, I didn't find it too difficult to get the downpipe section out that contained the second precat. The job probably took a little over an hour from start to finish to install my Walker precat. I also have a lift, and a wide selection of tools at my disposal, so that helped.
Also, I didn't find it too difficult to get the downpipe section out that contained the second precat. The job probably took a little over an hour from start to finish to install my Walker precat. I also have a lift, and a wide selection of tools at my disposal, so that helped.
Thread
Thread Starter
Forum
Replies
Last Post
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM