Is there a difference btwn SE and GLE front sway bars...and if so which is better?
Thanks

 

Are you talking about the sway bar end links?

They are the same but the bushing sizes are different

 

The SE has a different sway bar from the one used in the GXE and the GLE. The SE bar is thicker for a slightly firmer ride.

It's your personal preference which one you think is better.

 

George,
I'm sorry..I meant the front sway bar itself..not the links..but thanks

 

Wouldn't that be a lot of work to swap out?

Would Stiffer springs or coilovers work?

 

Dennis,
Thanks..thas the info I needed ...I'm putting some G35..18's and I was looking for a tighter and firmer ride ...I was thinkn to change the bushings, but I had a hunch the sway bar would better from a SE...I have a 01..can I use a sway bar from a 02 - 03?
Thanks
Kevin

 

that 1mm thickness doesnt make much of a difference, just get the poly urethane bushings for them and you are good to go.

 

Coolsun,
If I get the SE sway bar..do I need SE end links or can I use the GLE end links and what bushings (name brand) would you recommend
Thanks
Kevin

 

It's far too much time to switch the front sway bar to an SE unit. I would just get the Poly Bushings (ES bushings) for the model of your car.

End links are the same. I would go with Moog end links, although I went with OEM. In any case, spend your time elsewhere other than switch a 1mm (less than 0.040" of an inch) thicker sway bar.

 

NmexMax,
Thanks, your right..I will focus on some mods, but I'm still getting the G35 rims

Thanks everyone for answering