5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Which o2 Sensors to buy? Codes P0031, P0051, P0037, P0057

Old Mar 18, 2015 | 05:50 PM
  #1  
NYTooCooL's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Mar 2010
Posts: 434
From: Atlanta
Which o2 Sensors to buy? Codes P0031, P0051, P0037, P0057

Hey, i have a 5.5 Maxima. I've been looking up the codes and everything, but I thought Bank 1 Sensor 1 was a secondary. However, i think it might be a primary. Can you guys help me which sensors I need to buy according to these codes? p0031,p0051 , p0037, poo57. I'm sure 37/57 is secondary.Which are Upstream/Downstream? Also we should buy Bosh sensors right? Part # would be a great help. thanks guys!
Old Mar 18, 2015 | 06:17 PM
  #2  
barristan's Avatar
Supporting Maxima.org Member
 
Joined: Sep 2005
Posts: 311
From: NH
I'm no expert, but based on those codes you need to replace both sensors on bank 1. Google "maxima o2 sensor location" and look at "images".
Old Mar 18, 2015 | 10:15 PM
  #3  
NYTooCooL's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Mar 2010
Posts: 434
From: Atlanta
Originally Posted by barristan
I'm no expert, but based on those codes you need to replace both sensors on bank 1. Google "maxima o2 sensor location" and look at "images".
Yeah but there have been a few posts stating that the the P0031 code is Bank 2....where some posts say Bank 1 if im not mistaken...
Old Mar 18, 2015 | 10:23 PM
  #4  
george__'s Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2013
Posts: 4,230
From: Earth
Old Mar 18, 2015 | 10:47 PM
  #5  
NYTooCooL's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Mar 2010
Posts: 434
From: Atlanta
Originally Posted by george__
This chart has been noted to be slightly incorrect.... some say p0031 is bank 1 sensor 1... and other posts have said its bank 2....
Old Mar 18, 2015 | 10:52 PM
  #6  
george__'s Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2013
Posts: 4,230
From: Earth
Originally Posted by NYTooCooL
This chart has been noted to be slightly incorrect.... some say p0031 is bank 1 sensor 1... and other posts have said its bank 2....
http://www.nicoclub.com/FSM/Maxima/2002/EC.pdf

DTC P0031, P0032, P0051, P0052 HO2S1 HEATER
Old Mar 18, 2015 | 11:17 PM
  #7  
NYTooCooL's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Mar 2010
Posts: 434
From: Atlanta
http://www.courtesyparts.com/images/a33b/a33b_226-4.gif

Part # 22690 Both say Bank 1 Sensor 1.... So I'm guessing that's Upstream (Primary) So I just need to get the Bosch Upstream sensor right? Which one is which on the diagram though? like bank what sensor what? I've figured that the P0057 / P0037 is the Bank 1 Sensor 2 Rear Downstream ... Bosch 15225

Last edited by NYTooCooL; Mar 18, 2015 at 11:22 PM.
Old Mar 19, 2015 | 06:15 AM
  #8  
colt149's Avatar
Senior Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 463
From: Dumont, NJ
Originally Posted by NYTooCooL
Hey, i have a 5.5 Maxima. I've been looking up the codes and everything, but I thought Bank 1 Sensor 1 was a secondary. However, i think it might be a primary. Can you guys help me which sensors I need to buy according to these codes? p0031,p0051 , p0037, poo57. I'm sure 37/57 is secondary.Which are Upstream/Downstream? Also we should buy Bosh sensors right? Part # would be a great help. thanks guys!
For VQ35DE engine
P0031 & P0051: Primary 02 sensor near the firewall
P0037 & P0057: Secondary 02 sensor with white wire
Causes: clogged or deteriorating precat
Temporary fix: Replace 02 sensor with OEM genuine Nissan parts only.
Permanent fix: gut both precat (one near the firewall and one near the radiator )
Install nonfouler to the two secondary 02 sensor.
Old Mar 19, 2015 | 08:45 AM
  #9  
NYTooCooL's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Mar 2010
Posts: 434
From: Atlanta
Originally Posted by colt149
For VQ35DE engine
P0037 & P0057: Secondary 02 sensor with white wire
the colors on Bosch don't match oem. but the white one would be rear downstream right?
Old Mar 19, 2015 | 12:01 PM
  #10  
DukeLeto2's Avatar
Junior Member
 
Joined: Jul 2010
Posts: 25
I have a 5.5 and got a P0051 recently and it turned out to be Bank 2, Sensor 1 which is easily seen when looking down behind the radiator attached to manifold right off the engine and the connector goes to the blue O2 connector at the front of the engine. I don't know about the other codes, however, but I can tell you that it's definitely Bank 2, Sensor 1.

Best price I could find was here:
http://www.rockauto.com/catalog/more...id=445&jpid=14

Here's an illustration.



Good luck!
Old Mar 20, 2015 | 09:28 AM
  #11  
4thGenTuner's Avatar
Member
iTrader: (1)
 
Joined: Oct 2009
Posts: 210
From: Roanoke, VA
I would swap out the upstream (primaries) with new ones and SIM the downstream (secondary) sensors.


An o2 sim is cheaper & easier to install than the sensors.


If you have emissions testing, simply hide the SIM somewhere the inspector wont see it.


02simulators.com
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mvm062
Infiniti I30/I35
3
Nov 30, 2020 09:00 AM
220k+ A32
5th Generation Maxima (2000-2003)
14
Sep 11, 2015 02:18 AM
dcam0326
5th Generation Maxima (2000-2003)
8
Sep 7, 2015 07:26 AM
dcardello
4th Generation Maxima (1995-1999)
7
Sep 3, 2015 11:44 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 05:56 AM.