5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Randomly cannot shift into reverse or park

Thread Tools
 
Search this Thread
 
Old Mar 7, 2024 | 08:17 PM
  #1  
Skyline_Pilot's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Mar 2024
Posts: 2
Randomly cannot shift into reverse or park

Every now and then, usually when it is most inconvenient, like a parking manoeuvre, I cannot move the shifter beyond out of drive into park or reverse.

I have taken the shifter surround off and can see the little white plastic solenoid working. I cannot get it to fault no matter how many times I pump the brake pedal. When it gets "stuck" the solenoid is not moving. I was planning on replacing the pedal switch first, then looking at the solenoid. But after some more experimenting, I have noticed that when putting the car in drive and moving off, the solenoid is in the unlock position. It only locks when the car is moving at about 15km/hr/ then it unlocks when you slow right down. I presume this is to prevent you shifting into reverse when traveling, The times that it has got itself stuck, I have been driving along, slowed down and then tried to move into reverse. If the whole system is working then it should have unlocked when I dropped my speed.

I have lubricated the mechanism and I do not think it is getting jammed or anything like that.

Anybody else fixed this problem?

Attached Files
File Type: mov
IMG_0948.mov (679.4 KB, 7 views)
Old Apr 8, 2024 | 06:03 AM
  #2  
ColombianMax's Avatar
Please. Call me John. I insist
iTrader: (7)
 
Joined: Sep 2005
Posts: 4,945
From: Chicago
Do your brake lights function normally or do they also sometimes not light up when hitting the brake?
Old Apr 8, 2024 | 04:24 PM
  #3  
uptownsamcv's Avatar
Senior Member
 
Joined: Dec 2012
Posts: 1,345
From: Kissimmee FL
check both brake switch stoppers. one is for the brake light and the other is for other functions like cruise control stop and shifter lock.
Old Apr 10, 2024 | 02:05 AM
  #4  
Skyline_Pilot's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Mar 2024
Posts: 2
Yes, checked those and they seem all good. I changed the solenoid under the shifter, which did not fix the problem. Now looking to replace the shift lockout module behind the dash.
https://nissan.epc-data.com/teana/tn...ic/253/28540X/

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
3genube
3rd Generation Maxima (1989-1994)
10
Jun 22, 2013 08:45 AM
lokobreed
4th Generation Maxima (1995-1999)
4
Dec 5, 2005 09:07 PM
xlcrew
5th Generation Maxima (2000-2003)
6
Jun 9, 2005 07:43 PM
Love_00_Max
5th Generation Maxima (2000-2003)
1
May 31, 2005 11:42 AM
maximumsportZ
General Maxima Discussion
25
Apr 17, 2003 06:08 PM




All times are GMT -7. The time now is 08:57 PM.