6th gen leather e-brake boot (pics) - looking for donors for shift boots!
#41
Originally Posted by jsmithsole
Ramberg, so are you running just a cover on your e brake handle now, not sure but that's what it looks like...are you going to keep it that way with the leather boot?
I looked down at mine today and was like "damn that's ugly, I want a leather one!!" Make sure to post pics as soon as you get it installed...
I looked down at mine today and was like "damn that's ugly, I want a leather one!!" Make sure to post pics as soon as you get it installed...
chernmax cut about 2" off thew shaft.
#44
Originally Posted by ramberg
I received my today. Will install tomorrow and post pictures on Sun. evening when I come back from LI. Warren
If it shows up I'll install it and post pics as well. I didn't see an obvious way to remove the stock boot... any ideas or should I just start taking out screws and pulling things until it comes off?
#46
Originally Posted by viguera
That means mine should be at the house or it will be there tomorrow...
If it shows up I'll install it and post pics as well. I didn't see an obvious way to remove the stock boot... any ideas or should I just start taking out screws and pulling things until it comes off?
If it shows up I'll install it and post pics as well. I didn't see an obvious way to remove the stock boot... any ideas or should I just start taking out screws and pulling things until it comes off?
#47
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Ok E-Brake boot fans, received the REAL Burl Wood Dash kit for my ride yesterday and installed, so I only thought it fair to show why I selected the Sierra color. Anyway let the pics speak... Missan should make this standard EQ, PEACE All...
#53
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by carcus
Looks real good guys, did you have to remove the plastic the E-brake sits in to install it or did it just get pushed down in the gap....in other words, how does it install?
#55
installation is what Chernmax said. I have a stock set up so I just removed the plastic piece and slid the leather boot right over. use some elbow grease cause its a real snug fit.
04blackmaxx...i didnt paint anything, thats stock. is your 04 different?
04blackmaxx...i didnt paint anything, thats stock. is your 04 different?
#57
I have frost leather...my cup cover & the piece under the parking brake next to it is all the same color as the dashboard plastic. So looks like in the SE's nissan decided to make it all silver. I dont have much of a preference either way, interesting though.
#62
#63
Originally Posted by RedlineGoods.com
Hi guys, Here's a 10% discount code for all of you who want to get some of those boots: V3K54N0JH66. The code works on our website for 5 days from today.
Thank you!
Maciek
Thank you!
Maciek
awww im 3 days late on that
#68
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Those of you who installed new boots from RedLineGoods.com, please post pics so we can see the different colors used. Also, did anyone with a 2k4/2k5 6-speed pony up their shift boot for a template?
#72
Originally Posted by chernmax
Those of you who installed new boots from RedLineGoods.com, please post pics so we can see the different colors used. Also, did anyone with a 2k4/2k5 6-speed pony up their shift boot for a template?
#73
Originally Posted by Glude
So the black ebrake boot should match perfectly with the OEM black 6 speed boot right? I dont wanna order a boot and it be darker or lighter than the oem one.
it should be perfect!
Maciek
Thread
Thread Starter
Forum
Replies
Last Post
Finkle
4th Generation Maxima (1995-1999)
13
09-27-2015 09:53 PM
Starrider
3rd Generation Maxima (1989-1994)
4
09-17-2015 07:26 AM
Greenmaxspeed
4th Generation Classifieds (1995-1999)
0
08-08-2015 12:39 PM