coming soon to a maxima near you
#41
Originally Posted by MisterSparkle
he said that he weighted about 200+ which is very reasonable...in a sense that it is already better than the stillen from what i've seen of it...it should def provide much more control than the stillen.
however it lacks the cool graphics of the stillen...something i'm willing to sac for quality...lolxz
however it lacks the cool graphics of the stillen...something i'm willing to sac for quality...lolxz
So i placed my hands on the support brace just over the passenger headlight. Then I pressed down with all my weight (220lbs) on the corner of the car. I WAS SHOCKED TO SEE THE FRONT OF THE TOWER LEAN FORWARD and INWARD. Now this is with the BAR OFF, so anywhoo, the same test done while test fitting the bar, resulted in 0 Strut tower flex.
Thease little mods really do add up at the end.
Kamski
#43
Originally Posted by mroleg
LOL
When I get the production version, TAZ will help me make a cut template for the plastic trim pieces.
KAMSKI
#45
well yeah and then deus...do you think you can try it out when it comes out cause i think your the only one with the altima Front SWAY bar on the car...so kamski can you give a performance update on the FTB and when and if you get it deus can you give a reveiw with both FTB and FSB...and see what difference is? so that people have idea in what we have to look forward too? thanks
#46
Originally Posted by MisterSparkle
well yeah and then deus...do you think you can try it out when it comes out cause i think your the only one with the altima Front SWAY bar on the car...so kamski can you give a performance update on the FTB and when and if you get it deus can you give a reveiw with both FTB and FSB...and see what difference is? so that people have idea in what we have to look forward too? thanks
THE SECOND BEST MOD IS TAZES new .................. which im about to make a thread about.
Kamski
#49
Originally Posted by taz
Actually the spacer might be a problem. how thick is it?
link: http://www.skunk2.com/Merchant2/merc...roduct_Count=0
#50
Supporting Maxima.org Member
Thread Starter
iTrader: (20)
Join Date: Oct 2004
Location: vancouver, BC
Posts: 589
Originally Posted by eK9aT10pSi
sorry for the delayed response. its 5/8" so i think thats around 15-16mm
link: http://www.skunk2.com/Merchant2/merc...roduct_Count=0
link: http://www.skunk2.com/Merchant2/merc...roduct_Count=0
#51
Originally Posted by taz
15mm will make it really tight. it may still fit but you will definetly need atleast my MMI's for the VQ if not solid mounts to stop the engine from rocking.
#53
Replacing motor mounts is not an easy job -- like bolting on a strut-tower brace. This would put a whole "nother" light on this modification.
I thought the whole idea was to reduce the flexing of the strut-towers.
I thought the whole idea was to reduce the flexing of the strut-towers.
#54
Originally Posted by SilverMax_04
Replacing motor mounts is not an easy job -- like bolting on a strut-tower brace. This would put a whole "nother" light on this modification.
I thought the whole idea was to reduce the flexing of the strut-towers.
I thought the whole idea was to reduce the flexing of the strut-towers.
Better?
Kamski
#55
Supporting Maxima.org Member
Thread Starter
iTrader: (20)
Join Date: Oct 2004
Location: vancouver, BC
Posts: 589
Originally Posted by SilverMax_04
Replacing motor mounts is not an easy job -- like bolting on a strut-tower brace. This would put a whole "nother" light on this modification.
I thought the whole idea was to reduce the flexing of the strut-towers.
I thought the whole idea was to reduce the flexing of the strut-towers.
He has an spacer on his manifold, that is why he would need inserts. The spacer raises the manifold enough that if a strut bar were used they would most likely interfere with each other cause of the amount of movement the engine has. MMI's (motor mount inserts) fill the voids in your stock mounts to reduce excessive movement of the engine.
#57
Originally Posted by taz
He has an spacer on his manifold, that is why he would need inserts.
#58
Originally Posted by SilverMax_04
Thanks, taz. So much of what came before your explanation was "Greek" and abreviations that did not make sense to those of us who did not know this fact. Statements like: "MMI new therad BIOTCHES" -- what the hell does that mean?
#63
Supporting Maxima.org Member
Thread Starter
iTrader: (20)
Join Date: Oct 2004
Location: vancouver, BC
Posts: 589
Originally Posted by eK9aT10pSi
^^^ lol. taz, would your streetr mmi work fine with the spacer?
#75
Originally Posted by 4MySwee
What's the latest Taz? How are we doing on production?
Taz want to chime in?
Kamski
#80
Originally Posted by xoomer.com
I have no problem being last in line. Def interested in the product. Damn, another trip to the mechanic.
WHAT!!! DUDE r u serious, korwa 14mm klucz i w 5 minut zalozone. CO TAM MEHANIk!!?? Chyba sobie zartujesz.
Ja to jurz chyba 5 razy sciagalem i zakladalem przy testach probnych.
Dostaniesz instrukcje do instalacji.
Kamil