Installing A Rear View Camera Question
Thread Starter
Member
Joined: Oct 2005
Posts: 91
Installing A Rear View Camera Question
Ok I Have An Avic-n3 And I Ordered A Rear View Camera For It, But I Have One Problem.... Does Any One Know Exactly What Wire Of How To Tap Into The Reverse Cable Wire Or Any Other Way For The Head Unit To Realize Im In Reverse And For It To Switch To The Camera View Instantly.??? If Any One One Knows Let Me Know Please... Your Time Would Be Greatly Apreciated!!!
i went through the same thing. on your unit there should be an option somewhere along the lines of Rear Cam Interruption on/off, that's for it to react to the camera powering on when you go into reverse. now for how to do it, this is how i did it.
when you go on reverse, your reverse lights go on, so i figured i'd tap into that. remove the rear carpeting on the driver side of the trunk until you see the cable harness that goes into the taillight. then having all the lights off, put the car on reverse (e. brake on please!) so that only your reverse light is on. Use a continuity tester to find the cable that has the power, which i i think is a white and green cable. once you find it, splice the camera's cable into it, tape it up and that's it. it works great for me at least
when you go on reverse, your reverse lights go on, so i figured i'd tap into that. remove the rear carpeting on the driver side of the trunk until you see the cable harness that goes into the taillight. then having all the lights off, put the car on reverse (e. brake on please!) so that only your reverse light is on. Use a continuity tester to find the cable that has the power, which i i think is a white and green cable. once you find it, splice the camera's cable into it, tape it up and that's it. it works great for me at least
Thread Starter
Member
Joined: Oct 2005
Posts: 91
Originally Posted by TrojanNemo
i went through the same thing. on your unit there should be an option somewhere along the lines of Rear Cam Interruption on/off, that's for it to react to the camera powering on when you go into reverse. now for how to do it, this is how i did it.
when you go on reverse, your reverse lights go on, so i figured i'd tap into that. remove the rear carpeting on the driver side of the trunk until you see the cable harness that goes into the taillight. then having all the lights off, put the car on reverse (e. brake on please!) so that only your reverse light is on. Use a continuity tester to find the cable that has the power, which i i think is a white and green cable. once you find it, splice the camera's cable into it, tape it up and that's it. it works great for me at least
when you go on reverse, your reverse lights go on, so i figured i'd tap into that. remove the rear carpeting on the driver side of the trunk until you see the cable harness that goes into the taillight. then having all the lights off, put the car on reverse (e. brake on please!) so that only your reverse light is on. Use a continuity tester to find the cable that has the power, which i i think is a white and green cable. once you find it, splice the camera's cable into it, tape it up and that's it. it works great for me at least
Ok... sound good.... but let me ask you... can you watch your camera while driving??
Thread Starter
Member
Joined: Oct 2005
Posts: 91
Thanks guy.. I installed it today... I tapped into constant Power and grounded it... My navi "N3" Automatically goes into camera mode when i turn on my car.. other than that it can share a screen with the Navi Map.... So it will be on constantly until I turn off my car... its not bad... Thanks for that Write up Trojan Nemo it helped me in my installation...
Member
Joined: Jul 2007
Posts: 37
Originally Posted by TrojanNemo
i went through the same thing. on your unit there should be an option somewhere along the lines of Rear Cam Interruption on/off, that's for it to react to the camera powering on when you go into reverse. now for how to do it, this is how i did it.
when you go on reverse, your reverse lights go on, so i figured i'd tap into that. remove the rear carpeting on the driver side of the trunk until you see the cable harness that goes into the taillight. then having all the lights off, put the car on reverse (e. brake on please!) so that only your reverse light is on. Use a continuity tester to find the cable that has the power, which i i think is a white and green cable. once you find it, splice the camera's cable into it, tape it up and that's it. it works great for me at least
when you go on reverse, your reverse lights go on, so i figured i'd tap into that. remove the rear carpeting on the driver side of the trunk until you see the cable harness that goes into the taillight. then having all the lights off, put the car on reverse (e. brake on please!) so that only your reverse light is on. Use a continuity tester to find the cable that has the power, which i i think is a white and green cable. once you find it, splice the camera's cable into it, tape it up and that's it. it works great for me at least
Thread
Thread Starter
Forum
Replies
Last Post
Huttig2009
5th Generation Classifieds (2000-2003)
8
Sep 25, 2015 03:31 PM
Maxilano
7th Generation Maxima (2009-2015)
1
Aug 31, 2015 07:33 PM
BobMax
4th Generation Maxima (1995-1999)
5
Aug 19, 2015 04:39 PM
