RaicingLine Endlinks Problem
Originally Posted by eK9aT10pSi
how much was shipping chernmax? the bolts i assume are from home depot?
also, mine squeak when you get in/out and i was thinking something in the rear end. does yours do that anymore?
also, mine squeak when you get in/out and i was thinking something in the rear end. does yours do that anymore?
I have that all the time, but when I took them out, it was gone, so it is the bushings!
Joined: May 2005
Posts: 10,197
From: Displaced New Yorker in Southern, MD
Originally Posted by eK9aT10pSi
how much was shipping chernmax? the bolts i assume are from home depot?
also, mine squeak when you get in/out and i was thinking something in the rear end. does yours do that anymore?
also, mine squeak when you get in/out and i was thinking something in the rear end. does yours do that anymore?
Originally Posted by chernmax
Shipping was about $5.00 - $6.00 dollars, the bolts came from Lowes and ensure you get 3" stainless steel bolts with nuts that are strength graded 8. My noisy rear is now quiet again...
Do you notice the rear to be slightly stiffer under turns? I would figure that since the bushings is much thicker, it would hold it tighter, resulting in a better response. I'm sure it wouldn't be night and day, but maybe a little bit noticeable?
Originally Posted by coitaltie
Autozone does sell the ES bushing set if you have one there.
Edit: ****ing super! Just got them and am now off to Home Depot!
x 5 this just made my Friday night...kind of sad, don't you think?
Joined: May 2005
Posts: 10,197
From: Displaced New Yorker in Southern, MD
Originally Posted by !PrjctMax!
Are you still going to get the SS end-links/upgraded bushings from Taz when they become available?
Do you notice the rear to be slightly stiffer under turns? I would figure that since the bushings is much thicker, it would hold it tighter, resulting in a better response. I'm sure it wouldn't be night and day, but maybe a little bit noticeable?
Do you notice the rear to be slightly stiffer under turns? I would figure that since the bushings is much thicker, it would hold it tighter, resulting in a better response. I'm sure it wouldn't be night and day, but maybe a little bit noticeable?
Originally Posted by chernmax
OK after several days of driving WOW, the rear is so quiet and the car has even less rear sway, this is freakin awesome. Runs flat!!!
High speed=
and it's more stable through the turns and no more noise...for now, hopefully no more though 
Originally Posted by chernmax
Even if Taz comes out with new grommets, these are staying on my ride, the rear feels and sounds (no sound) AWESOME!!!
Originally Posted by !PrjctMax!
Same, and I just installed ES RSB bushings as well, yes I know that "both" of them are the same material (Progress and ES) but it seemed as if the bushings were also worn out so I replaced them and the ES were a VERY tight fit, but they fit and were extremely snug.
High speed= and it's more stable through the turns and no more noise...for now, hopefully no more though
High speed=
and it's more stable through the turns and no more noise...for now, hopefully no more though Kamski
FOR THOSE INTERESTED IN THESE BUSHINGS-Go to any local AutoZone and they should have them in stock. I found this out and within an hour of knowing, I got myself a set and had them installed the same night!
Originally Posted by !PrjctMax!
FOR THOSE INTERESTED IN THESE BUSHINGS-Go to any local AutoZone and they should have them in stock. I found this out and within an hour of knowing, I got myself a set and had them installed the same night!
WHICKEDNESS!!!
Thread
Thread Starter
Forum
Replies
Last Post
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
Sep 29, 2015 02:02 PM
