Resonator
I had that one and the Vibrant Ultra Quiet. No amount of resonators is going to solve a nasty drone I've found out. In the end its the mufflers that keep it quiet, but the resonator does help.
i removed the resonator. and the mufflers are hks and i already did dyno it i just dont know how to put the pics on here to show you guys i aint lying.
do it it sounds good and increase horse
Last edited by NismoMax80; Apr 29, 2008 at 03:30 PM.
apollos2, its going to be homemade, lol. i just want to figure everything out first. sorry about the wording, i have the CE y pipe, and exhaust is pending.
my other idea is to get one of the ebay knockoff ones for the piping already done and weld on my oem mufflers and change out the resonator.
ive been busy with finals so i havent had a chance to price up buying the mandrel bend piping from jcwhitney yet.
it wasnt too bad a couple of years ago when i did my own piping for my intercooler on my ek.
my other idea is to get one of the ebay knockoff ones for the piping already done and weld on my oem mufflers and change out the resonator.
ive been busy with finals so i havent had a chance to price up buying the mandrel bend piping from jcwhitney yet.
it wasnt too bad a couple of years ago when i did my own piping for my intercooler on my ek.
Yeah, he is trying to post from Cardomain. It's much easier to post from Photobucket. Give that a try.
EK...if it gets close to the $600 price range, you might as well go for that Nismo or Cattman catback, save yourself the hassle. Hilbe might even have a resonator or two he is trying to get rid of if you end up going homemade. I just added my Nismo exhaust and the Cattman Y, that set up totally rocks!
apollos2, its going to be homemade, lol. i just want to figure everything out first. sorry about the wording, i have the CE y pipe, and exhaust is pending.
my other idea is to get one of the ebay knockoff ones for the piping already done and weld on my oem mufflers and change out the resonator.
ive been busy with finals so i havent had a chance to price up buying the mandrel bend piping from jcwhitney yet.
it wasnt too bad a couple of years ago when i did my own piping for my intercooler on my ek.
my other idea is to get one of the ebay knockoff ones for the piping already done and weld on my oem mufflers and change out the resonator.
ive been busy with finals so i havent had a chance to price up buying the mandrel bend piping from jcwhitney yet.
it wasnt too bad a couple of years ago when i did my own piping for my intercooler on my ek.
Last edited by Apollos2; Apr 29, 2008 at 03:55 PM.
whoa!! it should be at MOST 1/2 of that, lol. only thing thats holding me back from the nismo one is that its single tips instead of the dual tips on each muffler.
hilbe had the cattman exhaust, right?
hilbe had the cattman exhaust, right?
As Apollo2 mentioned above, I have the Cattman resonator still left if you want to buy that off me. I sold my slightly modified Cattman exhaust and replaced it with the Nismo. The Cattman was too loud for my wife's taste...
I removed my resonator and kept the stock exhaust....added a custome down pipe and y pipe from the Cat to the mufflers....nice G35 coupe type sound yet quiet at idle and traffice light. Better breathing for the engine especially with a CAI and UDP.
Thread
Thread Starter
Forum
Replies
Last Post
MaximaDrvr
7th Generation Maxima (2009-2015)
16
Aug 19, 2015 08:20 PM
CAN-Toronto Magnaflow Resonator (huge one)
george__
5th Generation Classifieds (2000-2003)
0
Aug 15, 2015 07:24 PM




