Has anybody installed a toggle switch in their Max?
I have this, a rocker switch, not a toggle located next to my intelligent key docking port.
http://www.radioshack.com/product/in...ductId=2062523
I think it is that item or something similar.
There is a emtpy slot there that I took out, and jammed the rocker switch in to. It is a bit snug, so if you choose to do it, I'd recommend taking the lower part of the dash off and then snugging it in there.
I currently have no problems (about 2 ish months now?) and as a bonus it is mostly hidden and out of the way that no one will really notice.
I haven't tried it, but one might be able to squeeze another of the same switch in there if really needed for another project.
http://www.radioshack.com/product/in...ductId=2062523
I think it is that item or something similar.
There is a emtpy slot there that I took out, and jammed the rocker switch in to. It is a bit snug, so if you choose to do it, I'd recommend taking the lower part of the dash off and then snugging it in there.
I currently have no problems (about 2 ish months now?) and as a bonus it is mostly hidden and out of the way that no one will really notice.
I haven't tried it, but one might be able to squeeze another of the same switch in there if really needed for another project.
I have this, a rocker switch, not a toggle located next to my intelligent key docking port.
http://www.radioshack.com/product/in...ductId=2062523
I think it is that item or something similar.
There is a emtpy slot there that I took out, and jammed the rocker switch in to. It is a bit snug, so if you choose to do it, I'd recommend taking the lower part of the dash off and then snugging it in there.
I currently have no problems (about 2 ish months now?) and as a bonus it is mostly hidden and out of the way that no one will really notice.
I haven't tried it, but one might be able to squeeze another of the same switch in there if really needed for another project.
http://www.radioshack.com/product/in...ductId=2062523
I think it is that item or something similar.
There is a emtpy slot there that I took out, and jammed the rocker switch in to. It is a bit snug, so if you choose to do it, I'd recommend taking the lower part of the dash off and then snugging it in there.
I currently have no problems (about 2 ish months now?) and as a bonus it is mostly hidden and out of the way that no one will really notice.
I haven't tried it, but one might be able to squeeze another of the same switch in there if really needed for another project.
Thread
Thread Starter
Forum
Replies
Last Post
dank4us
7th Generation Maxima (2009-2015)
34
Jun 10, 2024 03:45 AM
rbaker100
8th Generation Maxima (2016-)
9
Aug 28, 2015 08:11 PM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
Aug 19, 2015 08:20 PM
BobMax
4th Generation Maxima (1995-1999)
1
Aug 15, 2015 12:35 PM



