Exhaust advice...

Reply Subscribe

Thread Tools

Search this Thread

Oct 16, 2018 | 07:38 PM

Mike Dee

Thread Starter

Junior Member

Joined: Jun 2018

Posts: 48

Exhaust advice...

Looking to pick up an exhaust kit. I am torn with whether to go with the Stillen kit and keep it subtle or something as aggressive as the Motordyne. Then of course I stumbled across a leftover Nismo kit.

Anybody have ave experience they want to share with any/all off the exhaust kits out there?

Last edited by Mike Dee; Oct 16, 2018 at 07:44 PM.

Oct 16, 2018 | 11:17 PM

16SRMax

Newbie - Just Registered

Joined: Oct 2018

Posts: 7

I did a custom catback with magnaflow universal mufflers with a resonator delete and it sounds pretty aggressive, not much drone either

Oct 17, 2018 | 06:04 AM

robtroxel

Senior Member

Joined: Feb 2010

Posts: 1,934

Best to get an audio on what you are looking at. Some of these drone like a "mooing cow".

Oct 19, 2018 | 09:23 PM

Mike Dee

Thread Starter

Junior Member

Joined: Jun 2018

Posts: 48

I will likely go with the Stillen. I do enjoy the peace and quiet when cruising on the highway. Just wanted a little more when I step on the pedal.

Oct 20, 2018 | 09:09 AM

kasdepwel

Member

Joined: Dec 2016

Posts: 168

I run a 7th gen Borla car back that I modified it’s rather quiet but sounds great when stepping on it

Oct 21, 2018 | 12:24 AM

Mike Dee

Thread Starter

Junior Member

Joined: Jun 2018

Posts: 48

Quote:

Originally Posted by kasdepwel

I run a 7th gen Borla car back that I modified it’s rather quiet but sounds great when stepping on it

How did you modify it?

Oct 21, 2018 | 05:43 AM

kasdepwel

Member

Joined: Dec 2016

Posts: 168

Quote:

Originally Posted by Mike Dee

How did you modify it?

you have to cut the muffler weld them back at a different angle or they’ll look funky. Also need to cut the hangers and change their position. Otherwise than this the rest fits wonderfully.

Oct 21, 2018 | 09:18 PM

Mike Dee

Thread Starter

Junior Member

Joined: Jun 2018

Posts: 48

Quote:

Originally Posted by kasdepwel

you have to cut the muffler weld them back at a different angle or they’ll look funky. Also need to cut the hangers and change their position. Otherwise than this the rest fits wonderfully.

Gotcha, thanks!