Coil Question
#1
be the change u want2C
Thread Starter
iTrader: (5)
Join Date: Apr 2003
Location: tampa bau
Posts: 2,214
Coil Question
I know i dont know much about electrical stuff but i just thought about this,
when ever a vq gets swaped into a different car(example 94 alti) they usually dont use ignition coils.
so here's my question
Would there be anyway to convert our ignition multi coil system to a single coil+wires system?
when ever a vq gets swaped into a different car(example 94 alti) they usually dont use ignition coils.
so here's my question
Would there be anyway to convert our ignition multi coil system to a single coil+wires system?
#2
Since when people swap Vq's into 1st and 2nd gen altimas??? The only person that wants to do that is Tilley.
Besides I'd rather have no distributor, less problems will occur.
The only reason I'd swap a VQ into an altima is for the sleeper effect. It's stupid swaping a VQ into an altima when you can swap it in a 4th gen with less problems.
Besides I'd rather have no distributor, less problems will occur.
The only reason I'd swap a VQ into an altima is for the sleeper effect. It's stupid swaping a VQ into an altima when you can swap it in a 4th gen with less problems.
#5
Originally Posted by Ninos_Maxima
cause our ignition coils suxors vsamoylov.
BrushedPewter Google is your friend... this has been done on many occasions im not talking about the vq35 swap either.
BrushedPewter Google is your friend... this has been done on many occasions im not talking about the vq35 swap either.
It runs 16.9 stock and 190 compression on all 4 cylenders.
I'll put a VQ35 into your car with i/h/e and call it a day.
Thread
Thread Starter
Forum
Replies
Last Post
pears
5th Generation Maxima (2000-2003)
15
09-18-2015 05:25 AM