3.5 motor swap using 3.0 cams
#1
3.5 motor swap using 3.0 cams
Well we are in the process of doing a 3.5 swap for a customer who is not willing to wait for some time to get the cam spacers for the 3.5 cams in the 4th gen. My question is if we decide to use the 3.0 cams, What would be the negative effect of using the 3.0 cams versus using the 3.5 cams?
#5
Originally Posted by Kevlo911
Less power.....
sorry for not being too clear. but I figured less power. But moreso, about how much? between which RPM. We can of course figure most of this out on our own and dyno after the install however I was just trying to figure out. if Someone had done it before.
#9
Originally Posted by Redmax
cool, does anyone know the cam profiles of the 3.0 cams and the 3.5
Best I can do...
http://forums.maxima.org/showthread.php?t=414267
#10
Exactly how long will it take for those spacers to get there and installed?
IMO you need to tell him to wait it would be pointless to make it this far and use 3.0 cams. It's going to drop the power across the board significantly.
IMO you need to tell him to wait it would be pointless to make it this far and use 3.0 cams. It's going to drop the power across the board significantly.
#12
Originally Posted by nismology
Which is??
#14
Originally Posted by diymaximakid
its top secret info and its not from anyone on this board.you gotta pm me,if your really interested.
#19
Originally Posted by mforrest100
Stephen Max sells the spacers for $75 and he can drill the cams. I think if he were to speak to Stephen Max and arrange a 2 day turnaround as far as sending it out one day, having Stephen Max do the work and send it out the same day next day air, it is possible to still retain the 3.5 cams.
#20
Originally Posted by nismology
I know that much. He mentioned a substitute that would go in place of the cam spacers that are sold by tilley and stephen max.
#21
Originally Posted by mforrest100
I hear you. I guess someone needs to PM him to find out what it is. What I posted seems like a good suggestion for a very speedy process. I know Stephen Max can do a quck turnaround seeing the urgency.
#22
Originally Posted by nismology
Figured out what you're gonna do about the spacer situation?
I'm waiting on mine, they should be coming in in about a week.
#23
Originally Posted by nismology
Figured out what you're gonna do about the spacer situation?
Thread
Thread Starter
Forum
Replies
Last Post
QueensMAX
5th Generation Maxima (2000-2003)
7
09-15-2015 04:14 AM