Need a block and crank..
#1
Need a block and crank..
Figured I'd post this here, since it'll get the most views.. I need a VQ bare block and crank.. Don't really care about the pistons/rods.. as long as the block/crank is reuseable. I have 200 bucks to spend.
Travis
Travis
#5
I have an '02 VQ35 engine sitting around but it needs work. It would need the cylinders bored and honed. Also the crank would need grinding and polishing as the bearings got worn out by coolant in the oil, however I haven't removed the crank yet to verify the damange just assuming. Probally deck the block and heads while you are at it.
#6
#7
I have an '02 VQ35 engine sitting around but it needs work. It would need the cylinders bored and honed. Also the crank would need grinding and polishing as the bearings got worn out by coolant in the oil, however I haven't removed the crank yet to verify the damange just assuming. Probally deck the block and heads while you are at it.
Travis
Thread
Thread Starter
Forum
Replies
Last Post
shilov
4th Generation Maxima (1995-1999)
13
02-19-2024 09:40 PM