Kal

iTrader: (1)

I'm thinking of mounting my jl 500/1 amp behing the rear seat on the drivers side. Im scared that if i screw it in that sometime later the amp might fall down. Can any one give me tips on where to mount the amp and what to use. I think the amp is about 5 lbs. Any info would help me since this is my first time with all this. Thanks.

loulax07

I'd say it'll be fine long as you use some coarse thread wood screws, not a problem
i've seen this done many times b4

mendon99

iTrader: (15)

i put mine right in the trunk on the left side... just screw the amp to a piece of plywood and punch a hole thru the carpet/plastic stuff there, theres a hole in the metal that you can attach the board to with a bolt. i did it with just one bolt, havent had any problems yet and it keeps it out of the way and looks nice.

MannyNJ2k2max

iTrader: (3)

its fine on the 5th gen, but just be aware that its on a deep incline (almost ~60 degree angle) I had no issues, and had my 4ch that way for months

Saddles

iTrader: (2)

false trunk and cut a hole out in the middle of the floor to showcase your amp :P...not really hard to do...looks really nice...amps out of the way...all criteria filled

Smaynor2934

iTrader: (2)

i have the same amp and i just mounted it on the box with the same screws i used to hold the subs into the box....works fine for me, no problems at all

2 Da Max

iTrader: (2)

what do u know im mounting my amp in a new location too, is it okay if i screw it up in the trunk on that plastic grey piece behind the rear seats?