New System = Need ideas/help with trunk setup
#42
In my last system, i had a 4channel amp putting 50X4. With this setup, its suppose to be putting 75 and its a JL Amp vs. the Planet Audio 4channel i had before. The output and soundquality was WAY Better with the planet audio 4channel and mbquarts. But i'm probably going to end up going with a 4channel instead of the 2channel anyways, i don't like not having the front sound stage.
But here's my other question, at high volumes the 2 channel amp will cut out completely, with only the sub playing. This is with the car ON and Running. WIth the car off, i am able to go higher and the speakers sound better. Does anyone know why this is? This stumps me because i would think if the alternator or battery is struggling it would cut out the sub amp. I'll have to see what they used for a ground or something for the 2channel. Any thoughts?
Overall, the bass is incredible with this system. More than satisfies me there, but the highs just don't cut it, it sounds raspy and muffled. I would much rather take good sounding mids and highs anyday.
But here's my other question, at high volumes the 2 channel amp will cut out completely, with only the sub playing. This is with the car ON and Running. WIth the car off, i am able to go higher and the speakers sound better. Does anyone know why this is? This stumps me because i would think if the alternator or battery is struggling it would cut out the sub amp. I'll have to see what they used for a ground or something for the 2channel. Any thoughts?
Overall, the bass is incredible with this system. More than satisfies me there, but the highs just don't cut it, it sounds raspy and muffled. I would much rather take good sounding mids and highs anyday.
#45
Thanks to DCman he was nice enough to help me figure out the problem. We found out that the installers used 8gauge wire from the batter and to the amps. So i'll do what he recommends and run at least a 4gauge. I agree that when 8 gauge is rated to 400watts, and when i'm pushing 800rms, i'm going to have some problems. So i'm going to swtich out the wire and that should solve most of my problems. So props to DCMan for helping me out!
#47
Originally Posted by DcMaN
actually if it was me i would use 0 gauge but then again thats me :] . 4 gauge should do the job. Remember BIGGER IS BETTER!!!!
#48
Originally Posted by nismos14
You probably need more power to those interior speakers. The can handle alot and will sound better with more power.
filtor do you have pics of you're system? A website?
filtor do you have pics of you're system? A website?
#50
Originally Posted by DcMaN
actually if it was me i would use 0 gauge but then again thats me :] . 4 gauge should do the job. Remember BIGGER IS BETTER!!!!
#53
honestly your pushing about 1000 RMS 4 gauge should be fine. But its gonna be pretty hard to find a distro for 4 gauge in and 4 gauge out. Thats why i said go with 0 gauge in and then split it off to 4 gauge.
#55
Originally Posted by Pearl96Max
Not always, especially in lower wattage/amperage applications. Going to a larger wire than needed could yield poor results.
I would definately go 0 gauge.
#56
Originally Posted by cscm094
How so? Do you have some documentation to backup your statement?
I would definately go 0 gauge.
I would definately go 0 gauge.
There are guidlines from every manufacturer. I personally would do 0ga in this application, but that is just what I get from the sheets I have. For 1000+watts anyway. 4ga will however work as well.
There are also pleanty of 4ga to 4ga distribution blocks around. Should be easy to find.
#57
Isn't there a 2 ga as well? Just wondering if that might be an option as well.
Also, wouldn't 0ga back and 8 from dis. block be kind of pointless? Wouldn't 8 just still bottleneck it?
thanks for the input guys, i'm taking the car back this weekend.
Also, wouldn't 0ga back and 8 from dis. block be kind of pointless? Wouldn't 8 just still bottleneck it?
thanks for the input guys, i'm taking the car back this weekend.
#58
Originally Posted by cscm094
How so? Do you have some documentation to backup your statement?
Or how about this. I've been doing installs for a little over 8 years now... and I agree with Don.
#59
Originally Posted by filtor1
Please tell me your joking. I am honestly not sure if your joking or not.
There are guidlines from every manufacturer. I personally would do 0ga in this application, but that is just what I get from the sheets I have. For 1000+watts anyway. 4ga will however work as well.
There are also pleanty of 4ga to 4ga distribution blocks around. Should be easy to find.
There are guidlines from every manufacturer. I personally would do 0ga in this application, but that is just what I get from the sheets I have. For 1000+watts anyway. 4ga will however work as well.
There are also pleanty of 4ga to 4ga distribution blocks around. Should be easy to find.
-Chris
#60
Originally Posted by cscm094
No why would I be joking? He's trying to tell me that using too much of a conductor will result in a loss of power. Incorrect. This is simple. Think of a water pipe. A larger diameter power will allow more water flow. A larger gauge wire will allow more current. I've been doing this for a while now, and work on half-million dollar cars everyday. Don't question my opinion.
-Chris
-Chris
On a civilized note. Please show me why I am wrong. I will give credit where it is due.
#61
Originally Posted by Pearl96Max
With a passion and Gave them away !
Cant believe that pic was still floating around...my little weekend project.
Cant believe that pic was still floating around...my little weekend project.
cscm, you should really simmer down and listen to those who know more than you. Like Don for example.
#65
Originally Posted by kcidmil
How about YEARS AND YEARS of installs and sales
Or how about this. I've been doing installs for a little over 8 years now... and I agree with Don.
Or how about this. I've been doing installs for a little over 8 years now... and I agree with Don.
Originally Posted by filtor1
OK, I did industrial water treatment for 8.5 years. Your analogy is terrible.
#66
Originally Posted by MainSource
cscm094=
The fact of the matter is, if you want to cap yourself with 4 ga, go right ahead. I would use 0 gauge. That way if i ever wanted to throw in another or different amp, just tap right off that distro block and not have to worry about running another dedicated wire to the battery. But I mean maybe you should listen to the guy who works on water systems for 8.5 years because that really has alot to do with car audio. Or maybe the guy who couldn't provide me with documentation as to why too much of a conductor yields a power loss. E-Thugs, gimme a break.
#67
Btw I've done some research and drawing a maximum of 90 amps, over 17 feet of conductor here are the voltage loss/resistance values:
4 gauge: 0.0043ohms / 0.387 drop in volts
0 gauge: 0.0017ohms / 0.153 drop in volts
There are laws to this sort of thing, not just opinions. But go ahead, use 4 gauge.
4 gauge: 0.0043ohms / 0.387 drop in volts
0 gauge: 0.0017ohms / 0.153 drop in volts
There are laws to this sort of thing, not just opinions. But go ahead, use 4 gauge.
#68
I haven't talked to them yet about rewiring the car, but i will ask how much of a $$ difference there is between the two. Do i have to jump between 0 and 4ga or would 2ga be something to consider as well.
cscm, that's interesting research. That's quite a big difference in voltage drop. I'll try to get as low as ga as possible.
Also, what do you guys think of the 300/4 amps? Would it be worth the extra money to go with that instead of the 2 channel?
cscm, that's interesting research. That's quite a big difference in voltage drop. I'll try to get as low as ga as possible.
Also, what do you guys think of the 300/4 amps? Would it be worth the extra money to go with that instead of the 2 channel?
#69
Originally Posted by cscm094
Two BMW's in my driveway, one of which is turbo running low 13s (at the age of 19), and you people still driving cheap asian cars =
What does this have to do with the debate? Nothing.
The fact of the matter is, if you want to cap yourself with 4 ga, go right ahead. I would use 0 gauge. That way if i ever wanted to throw in another or different amp, just tap right off that distro block and not have to worry about running another dedicated wire to the battery.
Good point. I agree totally. Especially if upgrading is in the car owners plans.
But I mean maybe you should listen to the guy who works on water systems for 8.5 years because that really has alot to do with car audio.
I only brought up my previous work experience to nullify a terrible analogy. Nothing more. An unquailified example, such as yours, was just that.
Or maybe the guy who couldn't provide me with documentation as to why too much of a conductor yields a power loss. E-Thugs, gimme a break.
What does this have to do with the debate? Nothing.
The fact of the matter is, if you want to cap yourself with 4 ga, go right ahead. I would use 0 gauge. That way if i ever wanted to throw in another or different amp, just tap right off that distro block and not have to worry about running another dedicated wire to the battery.
Good point. I agree totally. Especially if upgrading is in the car owners plans.
But I mean maybe you should listen to the guy who works on water systems for 8.5 years because that really has alot to do with car audio.
I only brought up my previous work experience to nullify a terrible analogy. Nothing more. An unquailified example, such as yours, was just that.
Or maybe the guy who couldn't provide me with documentation as to why too much of a conductor yields a power loss. E-Thugs, gimme a break.
I still havent seen your explanation or documantation. A link would be sufficient. I personally also agree that a smaller power wire will yeild a larger voltage drop over a specified legth given the same initial level of voltage. I believe the differential to be very small and ultimately negligable in this application. I know I would never notice a fraction of a volt when listening to my stereo. Not audibly atleast. I also don't think the corresponding amplifiers output would be drastically effected by this small difference either.
No E-thuggery here. I don't take well to people telling me what I can and cannot do. Sorry if such a small intellectual argument threatens you to the point where you have to tell others that are here to learn what to do.
Just for the record, you set the tone here with your first post. I just helped keep it alive.
#70
Originally Posted by cscm094
Btw I've done some research and drawing a maximum of 90 amps, over 17 feet of conductor here are the voltage loss/resistance values:
4 gauge: 0.0043ohms / 0.387 drop in volts
0 gauge: 0.0017ohms / 0.153 drop in volts
There are laws to this sort of thing, not just opinions. But go ahead, use 4 gauge.
4 gauge: 0.0043ohms / 0.387 drop in volts
0 gauge: 0.0017ohms / 0.153 drop in volts
There are laws to this sort of thing, not just opinions. But go ahead, use 4 gauge.
Does this take into account for different types of copper wire? Higher/lower strand count? If this is true in all fo the above cases, the drop in voltage and ohms IS negligable. Especially for a daily driver.
#71
Originally Posted by filtor1
I still havent seen your explanation or documantation. A link would be sufficient.
#72
Originally Posted by cscm094
#73
Originally Posted by cscm094
Two BMW's in my driveway, one of which is turbo running low 13s (at the age of 19), and you people still driving cheap asian cars =
Cheap a$$ asian cars have half the maintenance costs of your overgrown german junk. Especially true of Hondas. God you could build a whole Civic hatch for less than $25,000 and that's from the ground up.
Btw... the DEA usually starts watching when they notice 2 BMWs in the ghetto
And also... is only used when you have a bunch of people backing you up. And last time I noticed, this site had mainly Maxima owners, not BMW
#74
Originally Posted by kcidmil
Cheap a$$ asian cars have half the maintenance costs of your overgrown german junk. Especially true of Hondas. God you could build a whole Civic hatch for less than $25,000 and that's from the ground up.
Btw... the DEA usually starts watching when they notice 2 BMWs in the ghetto
And also... is only used when you have a bunch of people backing you up. And last time I noticed, this site had mainly Maxima owners, not BMW
Ghetto? Hmm cool dude
EDIT: Nice rims ahahahahhahahahahahhahhahaha
#76
Originally Posted by cscm094
Dude your rediculous. Look at your $hitbox. Its a 3rd gen. Might as well drive it to the junk yard.
#77
Originally Posted by cscm094
I used to have a 4th gen, at least that was a real maxima.
Not only are you a even bigger idiot because of your lack of knowledge. You also assume too much. I am a mechanic and do my own work. The only thing I don't do is oil changes. Guess that's the part about being too lazy.
So if you're not a drug dealing ghetto living idiot. Then you're a spoiled rich brat or think that you're parents BMWs some how add to your "coolness". BTW... I REALLY, REALLY HATE little fu(king rich kids. GO OUT AND ****ING WORK FOR SOMETHING IN YOUR LIFE!!!!!!!!!!!!!!
Everything I own I worked to get. And not only do I work to keep food on the table for my family. I put my life on the line so your little snobbish *** can have 2 ****ing BMWs. OR THINK YOU HAVE 2 BMWs.
Don is working his butt off for the same thing. Going to work everyday to provide for everything he has, and having to deal with customers. Not too mention volunteering his free time to spread his knowledge and help others. To only be questioned by some punk who has 2 BMWs.
WOW 2 BMWs... WORLD.... EVERYONE, we all have to stop and look at cscm094's 2 hunk of junks.
I have no problem admitting my Maxima is a POS. All cars are POS. They all break down. Mine happens to have 15" motegis to travel on, hail damage, and engine that's gaining miles. whoopty do. It ****ing moves. And cost less than 1/4 of yours.
#78
Originally Posted by cscm094
Dude your rediculous. Look at your $hitbox. Its a 3rd gen. Might as well drive it to the junk yard. I used to have a 4th gen, at least that was a real maxima. I've owned/driven/fixed all types of cars. My "overgrown german junk" (i don't know what that means) has yet to give me a problem. Anytime I worked on my maxima it was a pain in the ***. Even down to the hardware used, the quality is just not the same. Maybe when you learn how to fix a car and not bring it to a mechanic you'll understand.
Ghetto? Hmm cool dude
EDIT: Nice rims ahahahahhahahahahahhahhahaha
Ghetto? Hmm cool dude
EDIT: Nice rims ahahahahhahahahahahhahhahaha
I call BS on the whole you got two BMW's. I call your bluff. I live within 30 mintues of you what's up, mini-meet?? I go to shelton every once in a while also. BTW I use a 5 guage wire that can handle 900 rms with a inline 100 amp fuse. Good enough for my Solobaric 12L5's powered with a Cheap Legacy 1200rms/2400max LA2070. But I paid 50 off of eBay for and it does a decent job. Can't argue that.
#79
Within the context of a good argument, open debate is good and refreshing. I think we might need to refocus this thread. I would hate to see regulars take a vacation over someone so clearly geared tward getting his own.
#80
Originally Posted by cscm094
How so? Do you have some documentation to backup your statement?
I would definately go 0 gauge.
I would definately go 0 gauge.
I could give two ***** about your theory and your "supposed half million dollar car" jobs that you do. I think your boss has even less sense than you IF what claim has ANY validity at all.
Furthermore, this is a MAXIMA website in which case...
A: You dont have one
B: You *try* to bash them
C: I personally think your an @ss
So....you can take your arrogant attitude down a few notches or leave. This isnt baseball and theres no 3 strikes, consider this your first and only warning. Have a very pleasant evening.