Suggestions for new battery terminals?
#42
Originally Posted by DcMaN
it will fit in the 0 gauge slot... My phoenix gold terminals the positive has 2 0 gauge and 1 4 gauge. The negaitve has the same as well.
#44
Originally Posted by ObsidianIce69
hmmm, decisions decisions, now i'm checking out this expert series, and it's says it accepts dual 0 guage and dual 4 guager or a combination. Seems rather specific...will this not accept 2 gauge? I was going to use 2 guage for my amp power wire and 0 for the rest, i wasn't wanting to use 0 guage for the amp cause basically it's probably more than i need.
#45
Originally Posted by Metal Maxima
Any reason why you left the lifting strap on?
#46
Originally Posted by MannyNJ2k2max
if it'll fit 1 gauge and 4gauge, apparently it'll fit 2 gauge(being its in the middle of the two)
#47
Originally Posted by Pearl96Max
Stinger terminals here...
All wires replaced, non retained.
All wires replaced, non retained.
Ok...I just picked up a set of the Stinger terminals and I'm ready to do my Big 3 upgrade on my A33 / 5th Gen. For those that have replaced all stock wiring:
Did you fuse the new (+) battery terminal to the alt wire? There is a stock fuse on the stock positive battery cable that I am thinking of removing altogether...any thoughts/comments from those who have done this?
Any pics or step-by-step write ups for a 5th Gen? Just looking at the alternator placement it looks like a PITA to get to it....do I have to access it from under the chassis?
Thanks in advance for the help guys!
#50
I haven't done the upgrade myself yet i'm waiting on a few things to arrive but on all cars it's pretty much the same. This seems to be the write=up that everyone refers to
http://forum.sounddomain.com/forum/u...=5;t=007801;p=
and The Phatone...if you get something that accepts zero gauage it will accept 2 as well, and i'm sure there is a shop around LA that will do it, and car audio place or any decent mechanic can do it.
http://forum.sounddomain.com/forum/u...=5;t=007801;p=
and The Phatone...if you get something that accepts zero gauage it will accept 2 as well, and i'm sure there is a shop around LA that will do it, and car audio place or any decent mechanic can do it.
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
bigfrank
4th Generation Maxima (1995-1999)
2
10-01-2015 12:51 PM
DC_Juggernaut
7th Generation Maxima (2009-2015)
4
09-28-2015 04:07 PM