looking at subs..any ideas? (besides ascendant :)
looking at subs..any ideas? (besides ascendant :)
i only have about 300 watts at 4 ohms to work with.. and bridged ohms at that so no 2 ohm here. i was wondering what you guys thought might fit the bill. I was previously considering an 8" assassin IB but since i'm not exactly sure how much longer i'll have the max... i might rather go with a 10 or 12 although aa is still a strong candidate. anyway what I'm looking at is 300 watts wired 4 ohms, looking mostly for sq and overall value. also in consideration is the box type.. etc. all input welcome, thanks
I have an Rf HX2 dual 2 ohm you'll get quite a bit of output from that.... 300 watts is plenty as long as their good quality 300 watts.
You may find what your looking for in DLS' offerings too..... If you give a budget I'm sure there's a few people who could come up with somethin for ya.
You may find what your looking for in DLS' offerings too..... If you give a budget I'm sure there's a few people who could come up with somethin for ya.
well as far as the budget goes.. i'm pretty open on the price.. anything up to i'd say 150 is ok for a single sub, especially if its a 12 because then i'll already have a box useable for it. but any suggestions on the setup.. size recommended? sealed vs. ported?
well thats sealed.. just an old custom one. it would eventually be replaced, but i dont want to lay down more than 150 at once for this so i would end up building one to spec after a while, either ported or sealed..
I just found the DLS reference line on their page.. and the MW110, MW112, MW10, and MW12 all look pretty good. I know DLS is pretty good..anybody know anything about these specifically? also anything on prices or where i could get them? thanks...
TC Sounds has the dB500 12" on sale for for $75. It's a TC2+ motor, stamped steel basket and two-piece aluminium cone. It's VERY similar to the driver that they used to supply SVS to put in their PC+ and CS+ home sub systems.
-Robert
-Robert
Originally Posted by nismos14
I can do $135 shipped for my hx2, looks brand new. Its a hot sub. Sounds sick, very nice in a sealed box but LOTS of output ported.
Originally Posted by nismos14
Need a sub Pat?
CONSIDERING yanking the rear 6.5"s and using 2 6.5 "subs" or just 6.5" mids and deleting the sub/box combo altogether.
I heard an explorer with a set of well-installed and well-tuned 6.5 comps and no subs. I was amazed by the sound. He had the doors properly deadened and had 75W going to each speaker.
If not, i may pull the IDQ and try another sub.
I have a Pioneer 10" that would be good with a sealed box. Versatile sub and it pounds. It's the old school diamondplate version, I am still to this day tryin to find one in a 12". But anyways if you want that I can let it go cheap. $45 shipped.
Originally Posted by Robert_J
TC Sounds has the dB500 12" on sale for for $75. It's a TC2+ motor, stamped steel basket and two-piece aluminium cone. It's VERY similar to the driver that they used to supply SVS to put in their PC+ and CS+ home sub systems.
-Robert
-Robert
http://www.tcsounds.com/db500.htm
Originally Posted by releasedtruth
I've wanted to hear a soundsplinter for some time, but never met anyone that carries them. They look pretty awesome and the price certainly isn't bad.
If you want to hear something close, listen to a high end Eclipse sub. They are built in the same factory by the same people.
-Robert
Originally Posted by releasedtruth
I've wanted to hear a soundsplinter for some time, but never met anyone that carries them. They look pretty awesome and the price certainly isn't bad.
You could do whatever you can fit on there really. So if you don't htink you can fit a 15 then a 12 can be done, you just have to bolster it up well with mdf or other materials that is structurally sound enough to handle the weight.
Hmm. Any problems when having anything in the trunk taking up space? Rear window problems since its placed close to it?
Link to any past threads? Sorry for being a pain just interested in making space in the trunk. Dont mean to threadjack btw.
Link to any past threads? Sorry for being a pain just interested in making space in the trunk. Dont mean to threadjack btw.
Thread
Thread Starter
Forum
Replies
Last Post
tarun900
4th Generation Maxima (1995-1999)
19
Dec 20, 2021 06:57 PM
maxima297
4th Generation Maxima (1995-1999)
4
Sep 30, 2015 03:32 PM
JakeOfAllTrades
7th Generation Maxima (2009-2015)
1
Sep 30, 2015 03:16 PM




