THE Audio thread ! 06/07/08/09/10/11/12/13ers move along..
#1732
so i messed with the XEQ today. the damn thing seems like it's wider than the standard din size. it doesn't clear the width of the opening on my metra kit.
looks like i need to get the dremel out.
looks like i need to get the dremel out.
#1733
#1744
i was going to use a tiny nut and washer to mount them the kicks. it should help flatten the kicks out some. so i figured put the ring on the back side to form a good mounting perimeter.
but i'm all ears right now...
but i'm all ears right now...
#1751
pretty much. damn fg kicks are way too small for the 8s...and i don't really want to cut a hole into the floorboard to vent them. so into the door they go. i'm going to try using only a 1/4" spacer. hopefully that'll let the door panel snap back in without issues. i should have enough depth enough clearance as well with a 1/4" spacer.
#1753
I still have a very faint noise floor. I have already put too much tim into trying to eliminate it. SO I just deal with it. The Alpine 9833, Eclipse 8455, and the Pioneer 880 have all had the same noise. It gets irritating after a while knowing you have tried all but a complete rewire.
The CD7200 I installed in my friends truck has a little bit, but I didn't wire it so there is no telling what gobs of spaghetti lie in wait.
The CD7200 I installed in my friends truck has a little bit, but I didn't wire it so there is no telling what gobs of spaghetti lie in wait.
#1754
well i rather have a tiny bit then a whole bunch. you can't really hear the hiss with the volume past 20 or so but sometimes i'm parked and have the radio on, on volume 10 or so and the hiss is really annoying.
#1756
I tend to get a bit irritable
iTrader: (151)
Join Date: Feb 2002
Location: Central Jersey
Posts: 17,671
There are Very few HUs available that will not present a noise floor, or at least an audible one. All of which are either going to be waaay out of budget or unobtainable with ease. Combination of both often occurs.
#1758
They did. I promise you that. Mine cannot be heard until I turn the volume all the way down or just barely up to 10 or so. Past that you don't hear it at all. It took me a long time to get to that point though.
#1760
Let us know what you think of it.
On a side note I ordered a set of AA carbon mids today. I am pretty excited to see what they can do. I hope they are here by next week. Shawn and I are trying to set up a time slot at a local cabinet makers shop to make all the cuts either this sunday or monday. If not, we can cut the wood at his place. Next weekend will be fun.