Anyone have a manual (or know where I can find one online) for the rainbow SLC 265.25 NG components? Searched online with no luck.

Have one side wired up and the only sound is being pushed through the woofer. I have the headunit FR wires connected to the WF +/- on the crossover and then +/- WF and +/- TW wires connected on the output side of the crossover going to the respective speakers. THere's a number of jumpers on the crossover and I'm assuming an alternate combination should send signal to the tweets

thanks in advance.

 

can you snap a pic? it's been awhile since i messed with the SLC crossovers. the jumpers iirc affects how your tweeter plays.

 

Thanks





Hopefully these are clear. The pics are upside down. There are four jumper areas. They are as follows

7+ 8- 7+ with S4- S5+
S4- jumped to 8- AND S5+ jumped to 7+(the second 7+)

5 4 3 2 1 with S3
S3 jumped to 2

1 2 3 with a S2 label
1 jumped to 3

A B C with L1 label between A and B and S1 label across from C
C is jumped to A


Again, I have my stereo coming into the WF - and WF + on the x-over. THose terminals have a +2 and -3 designation on the crossover board. the unused terminals are designated +1 and -4

the outputs are designated 5+, 6-, 7+, and 8- all of which are in use.


Hope this makes sense. and thanks,

 

sorry for the late reply man! but i don't recognize that crossover, it's a lot different than the older series. I'll ask our resident expert to chime in on this though.

 

You need to connect Both sets of inputs. This is why the tweeters are not working. Where were these bought ? Is your dealer not assisting you ?

 

http://rainbow-audio.pl/docs/SLC_21025-23025-26525.pdf