shinjiduo is horrible to deal with
#45
The pic of the damage was from dismounting, not mounting. I've f***ed up enough tires on the machine to know that's dismount damage.
You don't ever put a tool in that area to mount a tire. Had the damage been caused by mashing against the wheel bead during mounting, it would have torn from the inside out, not along the center of the bead.
Damage like that is *mostly* caused by jabbing the tire with the spoon while trying to pry the bead over the side of the tire. you can also see the marks on the sidewall where the spoon was pressed against it while trying to shove the spoon between the wheel and tire.
It's possible that could have been done during the mounting, but very unlikely.
You don't ever put a tool in that area to mount a tire. Had the damage been caused by mashing against the wheel bead during mounting, it would have torn from the inside out, not along the center of the bead.
Damage like that is *mostly* caused by jabbing the tire with the spoon while trying to pry the bead over the side of the tire. you can also see the marks on the sidewall where the spoon was pressed against it while trying to shove the spoon between the wheel and tire.
It's possible that could have been done during the mounting, but very unlikely.
#48
^ dont forget the fact that one of the tires was damaged and the tires were mounted before. shinjiduo claims low pro tires get damaged when mounted and unmounted, yet when i bought the tires he never mentioned they were mounted before. he just said brand new. i found this out on my own with a little research. dishonest sellers are the worse sellers
Thread
Thread Starter
Forum
Replies
Last Post