Who wants to see what seafoam does(Video)
#42
Originally Posted by spirilis
the green circle. Remove the hose clamp, pull off the hose, turn it upside down and pour the SeaFoam into that hose with the engine running while fully warmed up. Pour no more than ~1/3rd can, then PROMPTLY shut off the engine, reinstall the hose and clamp, and let it sit for 5-15 minutes before starting it up.
When you're pouring it in, pour it in slow enough that the engine doesn't stall, but fast enough that the engine sputters or shakes a little... that's what I've done.
#43
Originally Posted by DAVE Sz
It's funny that all you little kids only remember my bad posts. Man, I'm tired.
#44
I saved the video to my desktop but when I play it back, I don't see any video, just a black screen. I need a special codec to view it?
Edit: Download and install the Divx codec from www.divx.com
After doing the SeaFoam thing in my car, it smoked for several minutes in my driveway. I then went for a drive and it smoked for at least 5 more minutes. It was embarrassing.
Edit: Download and install the Divx codec from www.divx.com
After doing the SeaFoam thing in my car, it smoked for several minutes in my driveway. I then went for a drive and it smoked for at least 5 more minutes. It was embarrassing.
#45
Any reason why you can't use the the hose that goes to the IACV? Take if off from valve and dip it into the seafoam. This way it goes through the butterfly and cleans everything in the intake tract. You won't get it on the Maf, because this hose i further down (on the 4th gen anyway
#46
Don't dip the IACV hose into the SEAFOAM, that's stupid, the hose is too big. What you can do is get a cup or something and "mist" the seafoam into the IACV hose. Try it and you'll know what I mean. Just put the hose close enough to the seafoam that you'll see it sucking it in as mist.
#47
Guest
Posts: n/a
Originally Posted by apbrian112
SOBER's not a little kid, he's 79 yrs old! and honestly... if i were to view the majority of your posts i'd have to agree with SOBER. so...
He's just a angry kid who got pulled away from mom's ***** way too early in his life.
#48
So far. I have been successful with the use of Seafoam. I used Deep Creep in the crankcase and wow what an improvement. I also used Deep Creep in the brake booster and that did wonders too. However, my EGR Valve is giving me troubles so my gas is sheety...Changed the oil out and its running a bit smoother. I should know more about then next 300-500 miles how the car is really going to run.
Thread
Thread Starter
Forum
Replies
Last Post
AaronL
5th Generation Maxima (2000-2003)
15
08-08-2020 10:31 AM
Need help
5th Generation Maxima (2000-2003)
23
10-02-2015 08:56 AM
rbaker100
8th Generation Maxima (2016-)
4
09-25-2015 07:52 PM